Two-Phase Heat Transfer Mechanisms within Plate Heat Exchangers
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The conversion to more environmentally friendly refrigerants is of prime importance for refrigeration and air-conditioning industries. A first option for the substitution of the fluids which use was banned could be natural refrigerants, such as CO2, or HFC ...
Two-phase flow operational stability of refrigerants R245fa, R236fa, and R1234ze(E) in 100 x 100 μm2 multi-microchannels for cooling of future high-performance 3D stacked architectures with interlayer cooling has been addressed in the current experimental ...
While possessing the potential to replace conventional air-cooled heat sinks, inter-tier microchannel liquid cooling of 3D ICs also creates the problem of increased thermal gradients from the fluid inlet to outlet ports [1, 2]. These cooling-induced therma ...
In this thesis work we investigate the heat transfer through the electrical insulation of superconducting cables cooled by super fluid helium. The cable insulation constitutes the most severe barrier for heat extraction from the superconducting magnets of ...
Over the years, much research has been conducted on two-phase flows in straight tubes because these tend, in length, to be predominant in two-phase systems. However, two-phase heat exchangers can also have singularity elements, where the most common type i ...
Experimental flow boiling heat transfer results are presented for horizontal 1.0 and 2.2 mm I. D. (internal diameter) stainless steel tubes for tests with R1234ze(E), a new refrigerant developed as a substitute for R134a with a much lower global warming po ...
In this work flow visualizations and measurements are made and analyzed to identify flow regime transitions, slug-to-intermittent, intermittent-to-annular and the dry-out inception, during the flow boiling of CO2 in a horizontal smooth tube of 6.00 mm of i ...
Horizontal falling film evaporators have the potential of displacing flooded evaporators as the standard in the refrigeration industry due to compelling advantages, such as smaller refrigerant charge and lower pressure drop. However, there is a need to imp ...
This paper concentrates on the characterization of the heat flow present during flame cutting of 60 mm thick steel (S355N) flanges, a typical size used in the fabrication of bridge girders. Experimental results are associated with a finite element analysis ...
This paper presents numerical simulations of annular laminar film condensation heat transfer in microchannels of different internal shapes. The model, which is based on a finite volume formulation of the Navier-Stokes and energy equations for the liquid ph ...