LTS and HTS high current conductor development for DEMO
Publications associées (53)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The control of the current, position and shape of an elongated cross-section tokamak plasma is complicated by the instability of the plasma vertical position. In this case the control becomes a significant problem when saturation of the power supplies is c ...
The use of high temperature superconductor (HTS) materials in future fusion machines could increase the efficiency drastically, but strong boundary conditions exist. To outline the prospects, challenges and problems, first the benefit of using HTS material ...
Prototype conductors for the ITER magnets have been tested extensively in the SULTAN facility at CRPP in the last decade. The in-depth characterization of the high current carrying conductors provided a valuable feedback in the design, with performance opt ...
Within the EFDA technology program, CRPP designed and prepared a short length of full size Nb3Sn developmental conductor to be tested in the SULTAN test facility. Nb3Sn strand with a higher specification and low Cu:non-Cu ratio was supplied by Outokumpu. H ...
The reduction of static heat load in superconducting magnet systems is of great importance because of reduction of refrigeration power and operational costs. The major elements that determine the heat load are the current leads. The use of high temperature ...
JORDI (JOint Resistance DIstribution), a dedicated test facility for the measurement of contact resistance distribution in full-size, ITER type conductor terminations, has been successfully commissioned at CRPP. In contrast to earlier attempts, where the c ...
The attention of the fusion magnet specialists has been drawn in the last years to the volt-ampere characteristic (VAC) of the large cable-in-conduit conductors (CICC), as early voltage was observed in conductor and model coil tests, far away from the expe ...
This paper presents an analysis of the experimental results and interpretation of the quench propagation runs performed in the QUELL experiment. It is shown, based on experimental data, that the quench propagation in cable-in-conduit conductors with a cent ...
SULTAN, the world wide unique, high field, large bore test facility. has been built as European contribution to the development program for ITER, The facility has primarily been devoted to the qualification of full-size cable-in-conduit-conductors (CICC) f ...
Two subsize, Nb3Sn cable-in-conduit conductors, are tested as short samples in the SULTAN test facility. Transverse load is applied by sweeping up and down the operating current in high background field. A serious performance loss of I, and n-factor is obs ...