Characterization of Mechanical Properties of MgB2 Conductor for the Superconducting Link Project at CERN
Publications associées (36)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The main electrical and mechanical requirements for the LTS fusion conductors of DEMO are retained as a starting point for the development of HTS fusion cables. Based on the HTS coated conductor technology, a flat cable design was proposed by CRPP Swiss Pl ...
The performance of tour Nb3Sn conductors for the ITER central solenoids was tested. The current sharing temperatures (T-cs) were measured over approximately 9000 electromagnetic cycles, including two or three thermal cycles between 4.2 K and room temperatu ...
In view of the development of cables for next-generation fusion reactors, research activities are carried out on all HTS materials available from industrial production. Preliminary design of a react and wind cable using Bi-2212 wires is carried out, inspir ...
MgB2 wire is a promising superconductor for the superconducting links for the high-luminosity upgrade of the large Hadron collider at CERN. The mechanical properties of MgB2 must be fully quantified for the cable design, and in this study, we evaluate the ...
The operation of Nb–Ti superconducting magnets in He II relies on superfluidity to overcome the severe thermal barrier represented by the cable electrical insulation. In wrapped cable insulations, like those used for the main magnets of the Large Hadron Co ...
Two ITER IF dual channel Cable-in-Conduit Conductors (CICCs) have been tested in the SULTAN test facility. The samples were heated either by foil heaters mounted on the outside of the conductor jacket or by induced AC losses. The steady-state temperature r ...
In this letter, we propose a formula for evaluating the transfer impedance of two-layer braided cable shields. The proposed formula results from the combination of the model proposed by Vance for the evaluation of the equivalent transfer impedance of a two ...
A new concept of polyimide electrical insulation for superconducting cables of accelerator magnets was developed in the last years. Its enhanced He II permeability allows a significant improvement of the heat extraction from the coil. This cable insulation ...
One of the biggest goals for the international thermonuclear experimental reactor (ITER) is the steady state operation. For this reason all its coils will be superconducting and Nb3Sn material is used for both the toroidal field (TF) and the central soleno ...
The brittleness of the MgB2 wires prevents performing a cable architecture with very small bending radius, similar to NbTi Rutherford cables. Consequently, it is important to reduce the thickness of the superconducting materials in order to increase its be ...