Effect of composite beam action on the hysteretic behavior of fully-restrained beam-to-column connections under cyclic loading
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The seismic in-plane response of cold-formed steel (CFS) framed diaphragm structures has not been the subject of extensive study. The information available specific to diaphragm design in the North American CFS design standard is based on limited experimen ...
International Association of Earthquake Engineering2017
Over the last few decades, the application of glass in building construction has extended from small four-side supported windowpanes to areas traditionally reserved for other materials, such as roofs, floors, staircases and full building envelopes. Glass i ...
In North America, a common design practice for steel frame buildings with perimeter steel special moment frames (SMFs) is to employ deep and slender wide-flange steel columns (i.e., range of column depth, d > 16 inches). Till recently, very little was know ...
Earthquake-induced collapse risk assessment of steel frame buildings requires the use of deterioration models that simulate instabilities that cause strength and stiffness deterioration of structural steel components. In the case of steel columns in additi ...
International Association of Earthquake Engineering2017
SUMMARY: This paper investigates the effect of the composite action on the seismic performance of steel special moment frames (SMFs) through collapse. A rational approach is first proposed to model the hysteretic behavior of fully restrained composite beam ...
Recent experiments on steel columns under multi-axis cyclic loading suggest that a steel column may experience appreciable axial shortening due to local buckling. Reconnaissance reports from recent earthquakes indicate that a number of embedded column base ...
The present paper proposes an improved design of conventional buckling braces (CBBs) by introducing intentional eccentricity along the brace length. The proposed brace is named the Brace with Intentional Eccentricity (BIE). Due to the inherent action momen ...
International Association of Earthquake Engineering2017
bstract A wide range of approximate methods has been historically proposed for performance-based assessment of frame buildings in the aftermath of an earthquake. Most of these methods typically require a detailed analytical model representation of the resp ...
International Association of Earthquake Engineering2017
This paper deals with the design method and the experimental verification of a new type of steel–concrete composite beam under static and fatigue loading. The connection is an alternative solution for steel–concrete composite bridges suitable for prefabric ...
This paper investigates the cyclic behavior of deep wide-flange sections, used as columns in steel Special Moment Frames (SMFs), through detailed finite element (FE) analysis. A wide range of wide-flange sections is subjected to symmetric cyclic lateral lo ...