Axially equilibrated displacement-based beam element for simulating the cyclic inelastic behaviour of RC members
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In Switzerland many new residential buildings are constructed as unreinforced masonry (URM) structures or as mixed structures where URM walls are coupled with reinforced concrete (RC) walls by RC slabs. At present the boundary conditions of URM walls subje ...
In modern unreinforced masonry buildings with stiff RC slabs, walls of the top floor are most susceptible to out-of-plane failure. The out-of-plane response depends not only on the acceleration demand and wall geom-etry but also on the static and kinematic ...
A three-dimensional deformable capsule convected through a square duct with a corner is studied via numerical simulations. We develop an accelerated boundary integral implementation adapted to general geometries and boundary conditions. A global spectral m ...
The dependence of curvature-induced secondary flow on the curvature ratio H/R (H is the average flow depth and R is the centreline radius of curvature), the Froude number Fr, and the dimensionless roughness coefficient Cf was systematically investigated in ...
The specific features of the proposed force-based formulation derived in the companion paper, which is applied for the first time to higher-order beam theories, are herein thoroughly validated. Introductory numerical examples illustrate the influence of me ...
In North America, a common design practice for steel frame buildings with perimeter steel special moment frames (SMFs) is to employ deep and slender wide-flange steel columns (i.e., range of column depth, d > 16 inches). Till recently, very little was know ...
We complete the picture of sharp eigenvalue estimates for the -Laplacian on a compact manifold by providing sharp estimates on the first nonzero eigenvalue of the nonlinear operator when the Ricci curvature is bounded from below by a negative constant. We ...
Plasma membrane tension and the pressure generated by actin polymerization are two antagonistic forces believed to define the protrusion rate at the leading edge of migrating cells [1-5]. Quantitatively, resistance to actin protrusion is a product of membr ...
In some computer vision applications, matching between shapes and colors are required. There are lots of similarity measures for shapes, especially curves, but as far as we know there are not many that deal with shapes and colors at the same time. In this ...
In codes the drift capacity of unreinforced masonry (URM) walls is often estimated as a function of the failure mode and the aspect ratio. The empirical relationships are based on results from quasi-static cyclic tests on single URM walls, which were teste ...
