N-formylation and N-methylation of amines using metal-free N-heterocyclic carbene catalysts and CO2 as carbon source

N-formylation and N-methylation of amines are important reactions that are used to produce a wide range of key intermediates and compounds. This protocol describes the environmentally benign N-formylation and N-methylation of primary and secondary amines using carbon dioxide (CO2) as the carbon source, hydrosilanes as reductants and N-heterocyclic carbenes (NHCs) as catalysts. Using CO2 as a reagent has the advantage of low cost and negligible toxicity. However, the catalyst is air-sensitive and must be generated fresh before use; consequently, the techniques used to prepare and manipulate the catalyst are described. The synthetic approach described in this protocol does not use any toxic reagents; using the appropriate catalyst, N-formylated or N-methylated products can be obtained with high selectivity. The overall time for catalyst preparation and for conducting several catalytic reactions in parallel is 15-48 h, depending on the nature of the substrates.

Development of heterogeneous catalytic systems for the transformation of carbon dioxide to methanol under mild conditions.

Aswin Gopakumar

Rising level of carbon dioxide (CO2) is a significant contributor to global warming and poses a major concern in modern society and environment. Anthropogenic activities such as fossil fuel combustion, cement production and deforestation are the primary causes of CO2 emissions. Creating sustainable pathways by converting abundantly available CO2 into fuel could help in mitigating the ever-growing global energy demand. Owing to the high intrinsic thermodynamic stability of CO2 molecule, the chemical reduction mechanism requires an appropriate catalyst system to reduce the high activation energy barrier. Additionally, the prospect of utilising CO2 as C1 synthon to convert the amines to afford value-added formamides is even more appealing. In the present dissertation, the development of efficient industrial friendly heterogeneous catalytic routes for CO2 fixation on amines by chemical reduction method to formamides, as well as their subsequent conversion to fuel, methanol under mild conditions are investigated. The first chapter describes an overview about the current trends in global climate change, about the challenges in CO2 capture and storage, the employment of CO2 as a source of carbon to synthesise industrially essential formamide products by catalytic reduction. Subsequently, the reduction pathway of formamides to afford methanol is also elucidated. Additionally, the prospect of using formic acid (a known CO2 and H2 carrier) to formylate amines and the consequent reduction to methanol is also given. The combination of these reactions presents a viable CO2 reduction system using amines. In the second chapter, N-formylation and N-methylation of amines using CO2 as the carbon source catalysed by palladium nanoparticles (Pd NPs) under mild conditions are discussed. The concluding results point out the high efficiency and high selectivity of Pd NPs in catalysing the amines to fix CO2 to afford formamides at room temperature. The Pd NPs exhibited excellent catalytic activity and selectivity on par with the reported catalysts. The overall selectivity and conversion of the products could be altered by adjusting the CO2 pressure, catalyst loading, temperature and solvent. The catalyst could be recycled for multiple reactions without significant loss of activity. The third chapter describes a âGeo-inspiredâ catalyst system with the use of an iron-rich natural mineral-Gibeon meteorite, as the catalyst for N-formylation and N-methylation of amines using CO2 as the carbon source at room temperature. Similar to the second chapter, the Gibeon meteorite exhibited excellent catalytic activity and selectivity on par with the reported catalysts. The overall selectivity and conversion could be altered by adjusting the CO2 pressure, catalyst loading, temperature and solvent. Comparative studies with the similar iron-containing alloys were also carried out. A plausible mechanism is proposed with the Gibeon meteoriteâs surface bound hydroxide ions. Moreover, the catalyst could be easily recovered and reused for multiple reactions as well without significant loss of activity. The fourth chapter encompasses the investigation of a metal-free catalytic system using polymerisable ionic liquid- (4-Vinylbenzyl)trimethylammonium chloride catalysed N-formylation and N-methylation of amines using CO2 as the carbon source under mild conditions. Similar to second and third chapters, the monomer and the polymer exhibited excellent catalytic activity (comparable

EPFL2018

Nanofibres de carbone sur filtre métallique comme support catalytique structuré

Pascal Tribolet

The main objectives of this work are 2-fold : The development of a novel type of composite material based on carbon nanofibers supported on sintered metal fibers filters (CNF/SMF) and to explore the use of this material as a catalytic support for a model reaction: selective hydrogenation of acetylene. The advantages of this novel support are: Due to carbon nanofibers, it combines a graphitic structure with a high specific surface area without microporosity. Supported carbon nanofibers can be used in a fixed bed reactor without very high pressure drop. Combination of two materials with high thermal conductivity gives a composite which keeps this property. It is suitable for highly exo/endothermic reactions, diminishing temperature gradients in the catalytic bed. The synthesis of carbon nanofibers on SMF filters was carried out by ethane catalytic decomposition at 655°C directly on metallic filters. An oxidation of SMF followed by a reduction in H2 create surface roughness, leading to a larger area for CNF nucleation. The CNF formation mechanism includes several steps: it starts with carbon deposition on metallic surface followed by its diffusion into the metal leading to carbides formation. When the limit of carbon solubility is attained, a layer of carbon is formed on the surface of metallic fibers. High tension within the bulk metal leads to carbide dissociation and by phase separation to graphite formation, which pushes the metallic particles through the carbon layer. Nickel, stainless steel an Inconel (an alloy of mainly nickel, iron and chromium) filters were used. The latter gave the highest uniformity of the carbon nanofibers layer showing an excellent mechanical stability. In order to control carbon deposition on the filters, a formal kinetic analysis of the decomposition reaction was undertaken. Partial orders of 1 for ethane, -2 for hydrogen and an apparent activation energy of 235 kJ/mol were obtained. The observed kinetics suggests strongly that the C – C bond scission is the rate determining step and not carbon diffusion into the metal which is often reported in the literature. The synthesis procedures like time on stream and reaction temperature were optimized: 1 hour of a mixture C2H6:H2:Ar (3:17:80) decomposition over SMFInconel at 655°C lead to ∼6% of carbon, leading to a CNF layer of 1 µm thickness covering the metallic fibers entirely. This material presents a high specific surface area (22.2 m2/g) and a low pressure drop for the gas flowing through. The carbon nanofibers have a diameter between 20 and 50 nm and a crystalline structure with platelets morphology where the graphene layers are stacked one above the other. Their surface is composed almost exclusively of carbon and hydrogen. Amongst the multiple possible applications of this novel composite material, its use as a catalyst support was assessed. Selective hydrogenation of acetylene was carried out over palladium supported on CNF/SMF and compared with commercial supports (ACF, EGF and AGF). The activated carbon fibers cloth (ACF) led to a Pd activity at least twice as E-type glass fibers tissue (EGF) or EGF covered by an alumina layer (AGF). Reaction kinetics was studied for Pd/ACF, leading to acetylene and hydrogen partial orders of -0.5 and 2.4, respectively and apparent activation energy of 50 kJ/mol. The negative partial order for C2H2 suggests high adsorption strength of this compound compared to other reagents on palladium. This particularity allows Pd to be selective. Hydrogenations are known to be structure sensitive. Therefore the catalyst activity for the model reaction depends on Pd particle size. It increases for large particle sizes. The control of this parameter was a priority. Variations of the palladium precursor, of the support and catalyst treatment were carried out. Micro-wave plasma was used since it is fast and has low energy consumption allowing chemically modifying the carbon support surface and activating catalyst after impregnation. This controls not only palladium sintering, but also decomposes tetraaminopalladate more efficiently, resulting in a catalyst activity of one order of magnitude higher. In order to control the palladium deposition on CNF/SMFInconel composite, it is important to have surface functional groups. The activation of carbon nanofibers was carried out with a 4 hours treatment in a boiling aqueous solution of hydrogen peroxide. This led to an amount on surface oxygen containing groups, per mass of carbon, higher than in ACF. Palladium particle size on the composite was controlled by support activation, the use of several metal precursors or different loadings or by a thermal treatment in argon at 500°C. Optimisation of the procedure allowed to obtain in a controlled way an average palladium particle sizes between 3.6 and 25 nm. The activity and selectivity towards ethylene of Pd/CNF/SMFInconel were observed to be higher compared to palladium supported on activated carbon, alumina or barite. Graphitic nature of carbon nanofibers, leading to strong metal-support interaction, was accounted as responsible for these improvements. The high thermal conductivity of the composite CNF/SMF ensured good heat transfer released due to the exothermicity of the reaction and allowed to work close to isothermal conditions in the catalytic bed. Finally it can be concluded, that for the first time carbon nanofibers synthesis was carried out in one step on sintered metal fibers filters, resulting in a novel structured composite material combining different specific properties and having promising potential applications.

EPFL2006

Metal-Free Catalyst for the Chemoselective Methylation of Amines Using Carbon Dioxide as a Carbon Source

Felix Daniel Bobbink, Shoubhik Das, Paul Joseph Dyson, Gabor Laurenczy

N-methylation of amines is an important step in the synthesis of many pharmaceuticals and has been widely applied in the preparation of other key intermediates and chemicals. Therefore, the development of efficient methylation methods has attracted considerable attention. In this respect, carbon dioxide is an attractive C-1 building block because it is an abundant, renewable, and nontoxic carbon source. Consequently, we developed a highly chemoselective, metal-free catalytic system that operates under ambient conditions for the N-methylation of amines.