Electronics Emulation for Real-Time Fault Location in Power Systems
Publications associées (109)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This paper presents a novel high-frequency filter concept based on a single MEMS capacitive shunt structure using meander arm inductance. Tuning ranges of the central frequency in the order of 55% are experimentally demonstrated for filters operating betwe ...
This paper presents a programmable multi-mode finite impulse response (FIR) filter implemented as switched capacitor (SC) technique in CMOS 0.18 μm technology. Intended application of the described circuit is in analog base-band filtering in GSM/WCDMA syst ...
This paper presents a new two-sections architecture of a low power switched capacitor (SC) finite impulse response (FIR) filter suitable for base-band signal processing in WCDMA and in GSM standards. The low power operation is possible due to several optim ...
Cutting-edge CMOS neurochips, which consist of a Microelectrode Array (MEA) manufactured on top of CMOS circuitry, allow the recording of the electrical activity of neural networks in-vitro, and their stimulation. As CMOS technology continues to scale down ...
A high capacitive ratio RF MEMS switch, with low-actuation voltage is designed, fabricated and experimentally validated on high-resistivity silicon (HRS) substrate. Thanks to very good fabrication control of all steps and to the high dielectric constant of ...
This paper proposes a novel multilevel Power Electronics Building Block (PEBB) for the 5 level ANPC multilevel voltage source inverter [7]. The PEBB is composed of 6 switches in a crossed configuration [8] and one capacitor. It is common to the 3 phases of ...
Based on analogy between the charging and discharging of humans' tolerance to overheating stimuli and that of charge in an electrical capacitor, this paper proposes a simple mathematical model for predicting overheating risk given a set of measured / simul ...
It is important for building designers to be able to judge if a space is likely to overheat, whether to determine if HVAC plant is required or to design this out by passive means. To this end several overheating risk criteria have recently been published. ...
In this paper we present an RF PA employing an output impedance matching network of the pi-type, where an inductor is variable. In order to implement this tunable inductor, the coupled-inductor technique [1] is used. Although other techniques for inductor ...
The power system has been used for communication purposes for many decades, although it was mainly the power utility companies that used low bit rates for control and monitoring purposes. In the last ten years, however, the deregulation of the power and te ...