High Gain Dual-Band Beam-Steering Transmit Array for Satcom Terminals at Ka-Band

Juan Ramon Mosig, Joana Rita Alves dos Santos Silva
2017
Article

Résumé

Transmit array design is more challenging for dualband operation than for single band, due to the independent 360 degrees phase wrapping jumps needed at each band when large electrical length compensation is involved. This happens when aiming at large gains, typically above 25 dBi with beam scanning and F/D

Source officielle

https://infoscience.epfl.ch/record/230721?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

High Gain Dual-Band Beam-Steering Transmit Array for Satcom Terminals at Ka-Band

Implementation and understanding of p plus fired rear hole selective tunnel oxide passivating contacts enabling > 22% conversion efficiency in p-type c-Si solar cells

The JET upgraded toroidal Alfven Eigenmode Diagnostic System

Four-Port Broadband Orthomode Transducer Enabling Arbitrary Interelement Spacing

Implementation and understanding of p plus fired rear hole selective tunnel oxide passivating contacts enabling > 22% conversion efficiency in p-type c-Si solar cells

The JET upgraded toroidal Alfven Eigenmode Diagnostic System

Four-Port Broadband Orthomode Transducer Enabling Arbitrary Interelement Spacing