High-Current Low-Voltage Power Supplies for Superconducting Magnets
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The PS accelerator (Proton-Synchrotron) at CERN (European Organization for Nuclear Research) is composed of one hundred magnets connected in series. During a cycle of 2.4 seconds, the active power at the magnets terminals varies from plus to minus 40 MW. A ...
The control of the high intensity beams of the CERN Large Hadron Collider is particular challenging and requires a good modeling of the machine. In recent years efforts were devoted to the design of a software infrastructure aimed at mimicking the behavior ...
The phase I LHC upgrade foresees the installation of a new final focusing for the high luminosity experiences in order to be able to focus the beams in the interaction points to ß* 0.25 cm. Key element of this upgrade is a large bore (120 mm) superconducti ...
A high-energy (0.5-3.0 TeV centre of mass) electron-positron Compact Linear Collider (CLIC) is being studied at CERN as a new physics facility. The design study has been optimized for 3 TeV centre-of-mass energy. Intense bunches injected into the main lina ...
In high energy physics and space applications it becomes mandatory to solve specific problems concerning the power supply. In both cases, it exists a harsh radiation environment and the presence of external electromagnetic perturbations. The former prevent ...
Spin-dependent transport properties of magnetic nanostructures have been investigated by means of magneto-thermogalvanic voltage measurements: the ac voltage response to an ac temperature oscillation is measured for various magnetic nanostructures under dc ...
Translationally cold and slow ND3 is prepared by filtering the slow molecules from a thermal gas-phase sample using a curved electrostatic hexapole guide. This filter, like the curved quadrupole guide introduced by Rangwala et al. Phys. Rev. A 67 043406 (2 ...
Colliders use final focus systems to reduce the transverse beam sizes at the interaction point in order to increase collision event rates. The maximum focal strength (gradient) of the quadrupoles, and the maximum beam size in them, together limit the beam ...
The stability is a key issue to design superconducting magnets and to ensure their proper exploitation. This is the case of the imminent operation of the Large Hadron Collider (LHC) accelerator, which requires a good knowledge of the stability margin of it ...
The commissioning and the exploitation of the LHC require a good knowledge of the stability margins of the superconducting magnets with respect to beam induced heat depositions. Previous studies showed that simple numerical models are suitable to carry out ...
