Competition between intragranular and intergranular deformation mechanisms in ODS ferritic steels during hot deformation at high strain rate
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Solute strengthening in substitutional alloys can be classified into two categories, strong-pinning (Friedel) and weak-pinning (Labusch), each with its own characteristic scaling with concentration and temperature. The transition between the two strengthen ...
The effect of deformation temperature and strain rate on the dynamic recrystallisation (DRX) behaviour of X70 pipeline steel was investigated. DRX parameters such as the critical and peak stresses and strains as well as the deformation activation energy we ...
Heavily deformed 18-carat yellow gold samples show a recrystallization peak at 700 K during the first heating. The mechanical loss spectrum of polycrystals shows a relaxation peak at about 780 K, which is absent in single crystals made from the same alloy. ...
A mechanism for (1 0 (1) over bar 2) twin nucleation in Mg is studied in which edge < c > and mixed < c + a > lattice dislocations dissociate into a stable twin, having at least the minimum 6-layer thickness formed by three glissile twinning dislocations, ...
A monocrystalline 18-carat yellow gold sample is deformed stepwise from 2% to 12% at room temperature. The mechanical loss spectrum is recorded and analysed. At low deformations the exponential high temperature background increases. At a critical deformati ...
Transparent polycrystalline alumina has many possible promising areas of application from jewelry and the watch industry to wave guides, energy economical lamp envelopes, and optical windows. Ultrahigh density, submicron sized grains and/or oriented micros ...
Magnesium is an excellent candidate as lightweight structural material, but has strong plastic anisotropy, and the activation of, operation of, and competition between different slip and twinning systems remain active areas of research. Here, the nucleatio ...
An in situ annealing stage has been developed in-house and integrated in the chamber of a Scanning Electron Microscope equipped with an Electron BackScattered Diffraction system. Based on the Joule effect, this device can reach the temperature of 1200°C at ...
We investigate various microstructural features of nanocrystalline electrodeposited Ni-Fe with a nominal iron content of 50% and compare them with the well-known nanocrystalline Ni system. In-depth electron microscopy analysis reveals the existence of larg ...
Under certain circumstances abnormal grain growth occurs in Nickel base superalloys during thermomechanical forming. Second phase particles are involved in the phenomenon, since they obviously do not hinder the motion of some boundaries, but the key parame ...
