Characterization of the tensile response of strain hardening UHPFRC - Chillon viaducts
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
Angle-and energy-dispersive X-ray diffraction experiments in a radial geometry were performed in the diamond anvil cell on polycrystalline platinum samples at pressures up to 63 GPa. Observed yield strength and texture depend on grain size. For samples wit ...
The strain-hardening behaviour of a tempered martensitic iron-chromium-carbon model was examined in terms of dislocation mechanics. Tensile tests of this body-centered cubic alloy were carried out from 77 up to 293 K. A specific relationship between the fl ...
We propose a minimal model for the response of seedlings to pullout constraints. Central to our approach is the idea of capturing not only average mechanical properties but also the stochastic component of the uprooting process. Our model accounts on one h ...
In many applications elastoplastic composites are used in limited amounts, therefore it is important to have estimates of the size of their representative volume element both for modeling and experimental purposes. In this work the tensile response of part ...
Aeroelastic tailoring requires structural compliance and thus often conflicts with stiffness requirements to carry prescribed aerodynamic loads. Recently however, the application of cellular structural concepts has suggested the potential to achieve compli ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
