Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?
Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur Graph Search.
The LinoSPAD camera system is a modular, compact and versatile time-resolved camera system, combining a linear 256 high fill factor pixel CMOS SPAD (single-photon avalanche diode) sensor with an FPGA (field-programmable gate array) and USB 3.0 transceiver board. This modularization permits the separate optimization or exchange of either the sensor front-end or the processing back-end, depending on the intended application, thus removing the traditional compromise between optimal SPAD technology on the one hand and time-stamping technology on the other hand. The FPGA firmware implements an array of 64 TDCs (time-to-digital converters) with histogram accumulators and a correction module to reduce non-linearities. Each TDC is capable of processing over 80 million photon detections per second and has an average timing resolution better than 50 ps. This article presents a complete and detailed characterization, covering all aspects of the system, from the SPAD array light sensitivity and noise to TDC linearity, from hardware/firmware/software co-design to signal processing, e.g., non-linearity correction, from power consumption to performance non-uniformity.
Francesco Regazzoni, Mirjana Stojilovic
, , , ,