Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
It has been known for more than 150 years that action effects in bridges due to traffic action are higher than it has to be expected for purely static loads. In the design of road bridges, this difference is considered by multiplying static traffic loads w ...
So-called “non-load bearing” parts of (railway) bridges increase the stiffness and decrease the stresses in short span bridge structures. The rail track, consisting of ballast, sleepers and rails, has a non-linear behaviour and its rigidity depends on the ...
Due to their aesthetic and structural advantages, tubular space truss structures are enjoying increasing popularity in modern bridge construction. The use of cast steel nodes for the joints between the circular hollow section members is also becoming incre ...
Up until today reinforced concrete has been used in most cases for the manufacturing of bridge decks. Depending on the quality of the work carried out, defects can already occur after only a few years. These defects mostly appear in the form of corrosion o ...
This paper reports on the composite action developed between pultruded FRP bridge deck systems and the supporting main girders for road bridges. Presented are requirements that an FRP deck must satisfy in order to function as part of the upper chord of the ...
Herein, a probabilistic model for predicting the effect of post-weld treatment on the fatigue performance of the welded joints in tubular truss bridges is described. Specifically, a probabilistic LEFM-based model is first developed for the fatigue analysis ...
the bridges over the river Capriasca (1996) and over the river Ticino (1997) are characterised by the application of an innovative structural system. The central part of the main span of both bridges is constituted by the bridge concrete deck with two long ...
In this paper, several probabilistic models for evaluating the fatigue performance of post-weld treated tubular bridge structures are briefly described. The application of the models is then demonstrated on a full-scale example bridge. Under realistic traf ...
Fatigue tests were carried out on welded circular hollow section K-joints typical to bridges. The tests specimens were large-scale (approximately 9 m long and 2 m high) trusses loaded in the plane of the truss. Measured member stresses showed that a signif ...
Optimal management strategies for a group of bridges that may incur damage from flooding during a 15-year period were determined using three approaches, and then the strategies were compared. The three approaches are the supply and demand system approach a ...
