Numerical study on factors that influence the in-plane drift capacity of unreinforced masonry walls
Publications associées (52)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Reinforced concrete (RC) flat slabs supported by slender columns are often used as gravity load resisting system for buildings in regions of moderate and high seismicity. Such buildings are typically braced by RC walls, which carry the largest portion of t ...
For several reasons the challenge to keep the loads to the first wall within engineering limits is substantially higher in DEMO compared to ITER. Therefore the pre-conceptual design development for DEMO that is currently ongoing in Europe needs to be based ...
Examining the results of a large set of quasi-static cyclic tests on unreinforced masonry (URM) walls showed that the drift capacity of URM walls reduces with increasing wall size. Such a size effect is of concern since most wall tests were carried out on ...
The severe damage and collapse of many reinforced concrete (RC) wall buildings in the recent earthquakes of Chile (2010) and New Zealand (2011) have shown that RC walls did not perform as well as required by the modern codes of both countries. It seems the ...
This paper summarises 123 existing quasi-static shear–compression tests on stone masonry walls and evaluates the results to provide the input required for the displacement-based assessment of stone masonry buildings. Based on the collected data, existing c ...
An analytical model describing the flexural response of vertically spanning out-of-plane loaded unreinforced masonry walls is presented in this paper. The model is based on the second-order Euler-Bernoulli beam theory and captures important characteristics ...
The present work deals with the large-scale application of the friction welding bonding technology on timber. The investigations that are described in the following were carried out on a prototype of a welding machine that was previously developed for the ...
Recent research showed that the in-plane horizontal displacement capacity of unreinforced masonry (URM) walls depends on numerous factors that are not yet captured by current empirical drift capacity models; e.g., axial stress, shear span, geometry of the ...
In codes the drift capacity of unreinforced masonry (URM) walls is often estimated as a function of the failure mode and the aspect ratio. The empirical relationships are based on results from quasi-static cyclic tests on single URM walls, which were teste ...
The current paper focuses on the determination of reliable numerical models of earth block masonry wallettes under different loading conditions. Uniaxial compression and diagonal compression tests were performed. Experimental behaviour was modelled with a ...