Mixed strain-displacement finite elements for landslide and avalanche release prediction
Publications associées (38)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Traction tests on soft tissues show that the shape of the stress strain curves depends on the strain rate at which the tests are performed. Many of the constitutive models that have been proposed fail to properly consider the effect of the strain rate when ...
Stabilized finite elements on strongly anisotropic meshes are considered. The design of the stability coefficients is addressed for both the advection-diffusion and the Stokes problems when using continuous piecewise linear finite elements on triangles. Us ...
This paper focuses on the constitutive behavior of the F82H ferritic/martensitic steels internationally investigated in the frame of the fusion material development program. Tensile tests were carried out in the temperature range (80-723 K) at different st ...
In quasi-brittle materials such as concrete, failure is preceded by highly localized deformation patterns. Localized failure is caused by strain softening, which cannot be described by classical local models, because they lack a length scale. Mathematicall ...
In an effort to better understand the plasticity of tempered martensitic steels, uniaxial tension and compression tests were carried out. The temperature dependence of both the yield stress and the post-yield stress behavior were compared, and it was shown ...
Constant strain-rate and creep tests have been performed on poly-quasicrystalline specimens of the icosahedral Al-Cu-Fe system. Three temperatures (870, 960 and 1000 K) have been investigated by creep for samples predeformed at constant strain-rate before ...
This paper presents a comparative study of surface micromachined structures fabricated in three different materials, using torsional micromirrors as test vehicle. The devices are realized in single-crystal silicon, polycrystalline silicon and aluminum. Mec ...
Plastic deformation under uniaxial longitudinal tension and compression is investigated for pure aluminum reinforced with a high volume fraction of parallel alumina fibers. The matrix sub-structure is also examined in transmission electron microscopy. The ...