Impedance-based real-time position sensor for lab-on-a-chip devices
Publications associées (42)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Since the first introduction of digital cameras, the camera market has been taking tremendous interest from many fields. This trend has even accelerated when the cost, size, and power consumption of such devices were reduced with the introduction of camera ...
An integrated chip for DNA hybridization detection was realized in a standard CMOS process: it hosts 80 biosensors subdivided in 2 channels, as well as D/A and A/D converters for electrical stimulation and readout. A microfluidic system, bonded on the surf ...
This study adds a new dimension to lab-on-a-chip systems by employing three-dimensional (3D) integration technology for improved performance, higher functionality, and on-chip computational power. Despite the extensive amount of current research on 3D memo ...
In this project, a resonator was theoretically defined and modelled in an effort to choose appropriate impedance matching between the resonator and outside electronics. Quite Universal Circuit Simulation (QUCS) was used to model the S-parameter of potentia ...
We present a novel image-based method to measure the on-chip microfluidic pressure and flow rate simultaneously by using the integrated optofluidic membrane interferometers (OMIs). The device was constructed with two layers of structured polydimethylsiloxa ...
The goal of this paper is to perform end-point impedance measurements across dominant and nondominant hands while doing airbrush painting and to use the results for developing a robotic assistance scheme. We study airbrush painting because it resembles in ...
Institute of Electrical and Electronics Engineers2015
The goal of this paper is to perform end-point impedance measurements across dominant and nondominant hands while doing airbrush painting and to use the results for developing a robotic assistance scheme. We study airbrush painting because it resembles in ...
Institute of Electrical and Electronics Engineers2015
In a non-ideal PLL circuit, leakage of the reference signal into the control line produces spurious tones. When the distorted PLL signal is used as a clock signal, it creates spurious tones in the sampled data. Our prior work used a training signal to esti ...
We report on the micro-fabrication and characterization of a chip-scale plasma light source based on a Rubidium (Rb) vapor cell. The Rb plasma light source is intended for use as an integrated optical pump-light source in miniature double-resonance Rb atom ...
Several Hall sensor configurations have been integrated in CMOS technology and analyzed in terms of offset at room temperature and offset drift. We looked for the best geometry that would minimize the offset and its drift. The targeted specification was 30 ...