The 2019 materials by design roadmap

Advances in renewable and sustainable energy technologies critically depend on our ability to design and realize materials with optimal properties. Materials discovery and design efforts ideally involve close coupling between materials prediction, synthesis and characterization. The increased use of computational tools, the generation of materials databases, and advances in experimental methods have substantially accelerated these activities. It is therefore an opportune time to consider future prospects for materials by design approaches. The purpose of this Roadmap is to present an overview of the current state of computational materials prediction, synthesis and characterization approaches, materials design needs for various technologies, and future challenges and opportunities that must be addressed. The various perspectives cover topics on computational techniques, validation, materials databases, materials informatics, high-throughput combinatorial methods, advanced characterization approaches, and materials design issues in thermoelectrics, photovoltaics, solid state lighting, catalysts, batteries, metal alloys, complex oxides and transparent conducting materials. It is our hope that this Roadmap will guide researchers and funding agencies in identifying new prospects for materials design.

Préparation et caractérisation de nanoparticules bimétalliques (Pt-Au) sur un substrat en diamant dopé au bore

Bahaa El Roustom

Using petrol as a main source of energy, during the 20th century, has caused considerable amounts of damage among which are atmospheric pollution and global warming. At the same time, many geologists and economists expect that the discovery rate of new petrol sources will not follow the market's demand causing a serious shortage of petrol in the near future. These alarming perspectives have motivated scientists around the world to develop new clean and renewable energy sources. It is in that objective that electrochemists intensified their research in order to develop the fuel cell technology. This latter consists in directly converting chemical energy into electricity. The main advantage of this technology over traditional energy production is that the fuel cell energy efficiency is Carnot cycle independent. The theoretical efficiency of such an energy source is nearly 90%. Direct Alcohol Fuel Cell (DAFC), fed by ethanol on one hand and by air (oxygen) in the other hand, is a very interesting option for such kind of energy production. Ethanol is a renewable energy source of vegetal origin whose CO2 production is consumed by plants during the cycle. Even though Pt has long been known to be a perfect catalyst for DAFC, it has some principal limitations, the most important ones being poisoning by intermediate products (OH on the cathodic side and CO on the anodic side) and a relatively high cost compared to other materials. These problems have pushed the experts in the field to focalize their research on the development of more suitable and better performing materials. Gold nanoparticles have shown a surprising catalytic activity, very different from the bulk, making them a preferential candidate to replace Pt. A system based on using two or more metals as catalysts (example Au-Pt) dispersed on an appropriate substrate seems to be also an interesting candidate to enhance the cell's efficiency. The substrate should be chemically inert, non-oxydable and should not present any interference with the electrochemical and electrocatalytic behaviour of the nanoparticles. In the first part, the employed substrate, which is boron doped diamond (BDD) is characterized. The substrate's main characteristics are its chemical inertness, its weak residual current and its resistance to corrosion. These characteristics contribute to making the substrate an ideal support for nanoparticles. In this work, the substrate is a diamond film, but for fuel cell applications diamond should be used as powder or dispersed particles. In chapters III and IV, we studied the effect of boron incorporation on the morphology and the behaviour of the diamond film. For this purpose, samples with different ratios of boron/carbon (B/C) in the vapour phase during preparation were characterized (B/C = 300, 1000, 2500 and 6000 ppm). Results showed that the grain size decreases with increasing boron content in the film. This is accompanied by a transition towards a quasi-metallic character. It was also found that graphitic impurities in the diamond film increase when the B/C ratio increases. We also established some graphitic impurities increase in the diamond film when the ratio of B/C increases. The identity of these impurities was established in chapter III as being surface redox couples (semi-quinone/semi-hydroquinone). Using cyclic voltametry we were able to observe a total elimination (B/C=300 ppm) or partial elimination (B/C=6000 ppm) of these surface redox couples. We also found in chapter IV that these surface redox couples are responsible of the electrochemical activity of the BDD electrode. BDD electrodes with different doping level B/C=300, 1000 and 6000 ppm) in the vapour phase are modified with IrO2 nanoparticles using the method of thermal decomposition. Our results showed that, at low potentials, the behaviour of the composite electrode IrO2/BDD with respect to the reaction of oxygen evolution is independent of the doping level. On the other hand, at high potentials, the weakly doped electrode (B/C=300 ppm) presents a supplementary overpotential due to the interface BDD-IrO2. An approach based on the double junction is developed in this work describing two distinct behaviours depending on the boron concentration in the diamond film. A new method for Au nanoparticles deposition on highly doped BDD electrodes (B/C= 2500 ppm) is presented in chapter VI. This method involves two steps: the first step consists on sputtering the equivalent of few nanolayers of Au on the diamond surface; the second step is a heat treatment in air at high temperatures. Several parameters that could influence the dispersion, the stability as well as the diameter of the Au nanoparticles are studied. In chapter VII, the behaviour of the composite electrode Au/BDD is studied in a solution containing redox couples in acid media. This electrode was simulated as an arrangement of active Au microelectrodes dispersed on a less active BDD substrate. The overall behaviour of the composite electrode (Au/BDD) has been related to the electrochemical rate constants on each material. In chapter VIII, another new synthesis method for a bimetallic system formed by Au and Pt nanoparticles dispersed on a BDD substrate is developed. This method consists in electrodepositing a small amount of Pt on a composite electrode Au/BDD. Our results showed that Pt was preferentially deposited on Au covering its whole surface. In fact, Au nanoparticles serve as germ of nucleation for Pt. In the following step, the bimetallic PtbAu/BDD is heated to 400°C in air to enhance the interaction between Au and Pt. The experiments showed that Au reappeared on the surface. The electrochemical behaviour of the bi-metallic electrode is characterized by a negative shift in the peak potential of reduction of Pt oxides. This is not the case of heterogeneous alloys obtained by the fusion of two metals at high temperatures. The composite electrode Au/BDD as well as the bi-metallic electrode Pt-Au/BDD are used for electrocatalytic applications. The studied reaction in chapter IX is the oxygen reduction reaction (ORR) in an acid medium. We found that the number of exchanged electrons increases with increasing the amount of Pt at the surface. Oxygen is reduced into H2O2 on the Au/BDD electrode and into H2O on the Pt-Au/BDD electrode. In chapter X we studied the reaction of oxidation of oxalic acid. The behaviour of both Au and Pt electrodes seemed very similar for this reaction. The bi-metallic electrode containing both Pt and Au on its surface has shown an intermediate behaviour between the behaviour of the two metals.

EPFL2006

Continuous Polyol Synthesis of Metal and Metal Oxide Nanoparticles Using a Segmented Flow Tubular Reactor (SFTR)

Paul Bowen, Frank Pilger, Jose Enrico Quijano Quinsaat, Christoph Stähli, Andrea Testino

Over the last years a new type of tubular plug flow reactor, the segmented flow tubular reactor (SFTR), has proven its versatility and robustness through the water-based synthesis of precipitates as varied as CaCO3, BaTiO3, Mn((1-x))Ni(x)C(2)O(4)2H(2)O, YBa oxalates, copper oxalate, ZnS, ZnO, iron oxides, and TiO2 produced with a high powder quality (phase composition, particle size, and shape) and high reproducibility. The SFTR has been developed to overcome the classical problems of powder production scale-up from batch processes, which are mainly linked with mass and heat transfer. Recently, the SFTR concept has been further developed and applied for the synthesis of metals, metal oxides, and salts in form of nano- or micro-particles in organic solvents. This has been done by increasing the working temperature and modifying the particle carrying solvent. In this paper we summarize the experimental results for four materials prepared according to the polyol synthesis route combined with the SFTR. CeO2, Ni, Ag, and Ca-3(PO4)(2) nanoparticles (NPs) can be obtained with a production rate of about 1-10 g per h. The production was carried out for several hours with constant product quality. These findings further corroborate the reliability and versatility of the SFTR for high throughput powder production.

Molecular Diversity Preservation International2015

Electronic Transport in 2D Materials with Strong Spin-orbit Coupling

Artem Pulkin

The thesis describes the computational study of structural, electonic and transport properties of monolayer transition metal dichalcogenides (TMDs) in the stable 2H and the metastable 1T' phases. Several aspects have been covered by the study including the electronic properties of the topological quantum spin Hall (QSH) state in the 1T' monolayer phase as well as the effects of strain, periodic line defects, interfaces and edges of monolayer TMDs. The electronic properties of the bulk monolayer phases were described by the ab-initio density functional theory framework while the electronic and transport properties of 1D defects were calculated using the non-equilibrium Green's function formalism. A specific focus was made on the transport of spin-polarized charge carriers across line defects in the monolayer 2H phase. Subject to energy, pseudomomentum and spin conservation, the size of the transport gap is governed by both bulk properties of a material and symmetries of a line defect. Outside the transport gap energy region, the charge carriers are discriminated with respect to their spin resulting in the spin polarization of the transmitted current. Next, the properties of the metastable monolayer 1T' phase were studied. The presence of a sufficiently large band gap is crucial to observe the QSH phase in the family of materials by probing the topological boundary states. The meV-order band gaps of the 1T' phase of monolayer TMDs were found to be sensitive to materials' lattice constants suggesting the control of the band gap size by strain. In particular, the electronic band structure and the size of the band gap in monolayer 1T'-WSe2 were found to be in agreement with spectroscopy studies. The topologically protected states at the edges of the monolayer 1T' phase as well as at the boundaries between the topological 1T' phase and the trivial 2H phase of monolayer TMDs were studied. Specific atomic structure configurations were suggested to observe experimentally the topological protection of the charge carrier transport against back-scattering. Finally, in the context of lateral semiconducting device engineering, the electronic and transverse transport properties of 2H-1T' phase boundaries as well as the dimerization defects in the 1T' phase were investigated. Both kinds of defects considered exhibit a relatively large transmission probability for the charge carriers crossing the defects. However, the differences between the shapes of bulk bands of the two phases open a sizeable transport gap for charge carriers crossing periodic domain boundaries between the monolayer 2H and 1T' phases. The calculated formation energies of dimerization defects were found to be relatively low suggesting their high concentration in real samples of monolayer 1T'-TMDs. Additionally, the thesis includes studies of magnetic dopants on the surface of Bi2Te3 and atomic vacancies in monolayer 2H-MoSe2 where the electronic properties of point defects were calculated and compared to experimental results. The two possible adsorption sites of Fe on the surface of Bi2Te3 both show a large out-of-plane magnetic anisotropy in agreement with experiments. The calculated local electronic properties of Se vacancies in monolayer 2H-MoSe2 show the presence of in-gap states which are not observed in experiment. Nevertheless, the combination of theoretical and experimental scanning tunneling microscopy images allowed the unambiguous identification of the vacancy defect.