A Continuous-flow Photocatalytic Reactor for the Precisely Controlled Deposition of Metallic Nanoparticles

In this work, a novel photocatalytic reactor for the pulsed and controlled excitation of the photocatalyst and the precise deposition of metallic nanoparticles is developed. Guidelines for the replication of the reactor and its operation are provided in detail. Three different composite systems (Pt/graphene, Pt/TiO2, and Au/TiO2) with monodisperse and uniformly distributed particles are produced by this reactor, and the photodeposition mechanism, as well as the synthesis optimization strategy, are discussed. The synthesis methods and their technical aspects are described comprehensively. The role of the ultraviolet (UV) dose (in each excitation pulse) on the photodeposition process is investigated and the optimum values for each composite system are provided.

Aspects of two dimensional magnetic Schrödinger operatorsquantum hall systems and magnetic Stark resonances

Christian Ferrari

In this PhD thesis we deal with two mathematical problems arising from quantum mechanics. We consider a spinless non relativistic quantum particle whose configuration space is a two dimensional surface S. We also suppose that the particle feels the effect of an homogeneous magnetic field perpendicular to the surface S. In the first case S = R × SL1, the infinite cylinder of circumference L, corresponding to periodic boundary conditions, while in the second one S = R2. In both cases the particle feels the effect of an additional suitable potential. We are thus left with the study of two specific classes of Schrödinger operators. The operator of the first class generates the dynamics of the particle when it is submitted to an Anderson-type random potential, as well as to a non random potential confining the particle along the cylinder axis in an interval of length L. In this case we describe the spectrum and classify it by the quantum mechanical current carried by the corresponding eigenfunctions. We prove that there are spectral regions in which all the eigenvalues have an order one current with respect to L, and spectral regions where eigenvalues with order one current and eigenvalues with infinitesimal current with respect to L are intermixed. These results are relevant for the theory of the integer quantum Hall effect. The second Schrödinger operator class corresponds to the physical situation where the potential is the sum of a "local" potential and of a potential due to a weak constant electric field F. In this case we show that the resonant states, induced by the electric field, decay exponentially at a rate given by the imaginary part of the eigenvalues of some non self-adjoint operator. Moreover we prove an upper bound on this imaginary part that turns out to be of order exp(-1/F2) as F goes to zero. Therefore the lifetime of the resonant states is at least of order exp(-1/F2).

EPFL2003

On the relationship between the microstructure and the mechanical properties of an ODS ferritic/martensitic steel

Amuthan Ramar

In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported by a good thermal conductivity, swelling resistance and low radiation damage accumulation of the base material, such as EUROFER97, are further enhanced by the presence of a fine dispersion of nanometric oxide particles. They would allow in principle for a higher operating temperature of the fusion reactor, above 550°C, which improves its thermal efficiency. In effect, their strength remains higher than the base material at high temperatures. There are however limitations to their application in the reactor, which relate to the intimate link between the microstructure and the mechanical properties. These limitations, such as an increased ductile to brittle transition temperature above room temperature relative to the base material, come directly from the role played by the oxide particles but also from their indirect impact on the overall microstructure, stemming from the procedure of elaboration of these materials. In addition, there is a lack of knowledge on their response to irradiation, which, even though it appears to be promising with a reduced irradiation induced hardening, is not very well understood. In this work we have developed and evaluated ferritic/martensitic steel, EUROFER97, strengthened by a dispersion of yttria particles. (1) The powder metallurgical process used to obtain it was optimized, (2) the basic mechanisms of hardening were identified and (3) the impact of irradiation on its microstructure and mechanical properties were investigated. In order to understand the behaviour of this class of material other oxide dispersion strengthened (ODS) ferritic/martensitic steels based on EUROFER97 and model alloys were also investigated. For the elaboration of the ODS steel the powders of atomized EUROFER97 and yttria are ball milled in a planetary ball mill and the material is compacted by hot isostatic pressing (HIP). The mechanical properties are evaluated by uniaxial tensile test, Charpy test and micro-indentation while the microstructure is investigated by optical microscopy, scanning electron microscopy and transmission electron microscopy. The focused ion beam (FIB) technique is also used. In the study of the ball milling it appears that the optimal time is 20 hours, as the X-ray peak broadening, crystallite size and hardness of the particles remain unchanged at longer times. Yttria nanoparticles clusters are no more detectable by X-ray after 2 hrs of milling, which is attributed here to their incorporation in the matrix, as opposed to dissolution in the matrix as is often suggested in the open literature. HR-TEM performed on the yttria particles before and after incorporation in the steel by ball milling shows that the yttria maintain its bcc equilibrium structure throughout the process. This could suggest that they are not dissolved during ball milling. We have clarified this point by a cross sectional examination of the EUROFER97 ball milled particles with 0.3wt% of yttria in an FIB. By X-ray EDS analysis it shows nanometric regions reach in yttrium and oxygen, which are the yttria particles embedded in the EUROFER97 particles, proving that they are not dissolved by ball milling. The mechanism at the origin of the alloy compaction during HIP was elaborated. The alloy compaction was done through HIPing at 1150°C for 2.5 hrs at a pressure of 190 MPa. This condition is shown to provide the highest bulk density, to a value close to 99.9%. In the optimization process, it is found that temperature plays a larger role than pressure for alloy compaction. The compaction appears to be mainly due to diffusion. Also, it appears that the ball milled particle size plays a major role in the alloy compaction. It is shown that smaller particles size induces better compaction, provided that the densification proceeds through diffusion flow. This further suggests to terminate the ball milling process by 20 hrs as the particles size reaches its minimum. The impact of the ball milling process on the mechanical properties was evaluated. EUROFER97 with and without ball milling, with and without oxide addition presents an average density around 99.8%. In the as received state, casted EUROFER97, atomized EUROFER97, ball milled EUROFER97 and ODS Yttria present microstructure morphology typical of tempered martensite, whereas ODS Ti presents a nano sized grain microstructure with an average grain size of 200 nm. Ball milling and HIPping does have a slight influence up to 400°C, due to the higher dislocation density induced by ball milling relative to casted EUROFER97. It becomes negligible above 400°C, since both casted and ball milled EUROFER97 present similar hardness and microstructure. In ODS Yttria, yttria presents an average particle size of 25 nm. In ODS Ti, Y-Ti-O presents an average particle size of 7 nm. In the following the identification of the hardening mechanisms in ODS F/M steels. A new model was developed to quantify the collective hardening due to different obstacles, assuming that they provide independent hardening mechanisms. The model helped identifying the dominating source of hardening in ODS F/M steels. The base of the model is the dispersion barrier strengthening model, which is given by Δσsparticle or defects = Mαμb(Nd)1/2 for the hardening due small defects or oxide particles and is given by Δσd-d = Mαμb(ρ)1/2 for the hardening due to dislocations. In this approximation, the total hardening is then given by Δσtotal = {(Δσd-d)2 + (Δσparticle or defects)2}1/2 . The model is used to explain the hardening due to oxides, dislocations and irradiation induced defects. It appears that dispersed oxides is dominating hardness up to 800°C, while following a heat treatment at 1000°C it is the dislocations that then dominate the hardness. Deformation mechanisms were investigated using differential strain rate experiments. The activation parameters, i.e. the activation volume and activation energy, were calculated. It appears that there is a decrease in the activation volume from room temperature to 400°C, which is less than 3%. At about 500°C there is a sudden drop in the activation volume that reaches a minimum at 600°C. With further increase in temperature, there is a significant raise in the activation volume. This abrupt decrease between 400°C and 600°C hints at a change in dislocation-rate controlling mechanism, marking two regimes, a low temperature one and a high temperature one. In situ TEM observations show that at low temperature the deformation is mainly due to the formation of the Orowan loops around the particle. At high temperature the activation energy is about 3.4 eV for ODS, whereas it is 1.3 eV for EUROFER97. The calculated activation energy corresponds well to the one of dislocation climb mechanism. This indicates that at high temperature the yttria particles could be overcome by climb, while at low temperature they are overcome by the Orowan mechanism. The peculiar response of the yield stress to irradiation for this class of material was rationalized using the total hardening model we developed. At a dose of 2 dpa, irradiation induced defects are higher in number density than the dispersed yttria particles, which although they are weaker than the yttria particles they can explain the significant hardening observed in the material. Conversely, the shallow impact of irradiation on ODS F/M steels at low doses, relative to base F/M steels, is explained by the fact that the amount of dispersoid is found to be higher than the density of irradiation induced defects.

EPFL2008

Metal Clusters on Surfaces

Michael Hugentobler

The morphology, stability and reactivity of nanometre-sized particles (Au, Pt) is investigated on three different supports. Gold nanoparticles with a diameter comprised between 4 and 6nm are stabilized in nanosized pits of well defined depth in highly oriented pyrolytic graphite (HOPG). These pits are produced by creation of artificial defects, followed by etching under a controlled oxygen atmosphere. At low Au coverage, clusters are found on the edges of the hexagonal pits maximizing the contact to dangling bonds on graphite multisteps. Larger coverage results in Au beads of well defined shape and with a constant bead density per unit length. Most remarkable is the stability of these nanostructures under ambient conditions. Temperatures as high as 650 K do not alter the morphology of the gold clusters. Above 700 K, the gold clusters catalyze the etching of graphite layers when heated under atmospheric conditions. The depth of the etching channel is defined by the depth of the pit and the channel width can be controlled by the cluster size. Hydrogen, oxygen and water are dissociated on the Au clusters at low temperatures (> 400 K). CO and CO2 is produced above 700 K which confirms the etching of the multilayer graphene sheets. The so-called water-gas shift reaction has been observed where oxygen and water dissociate on the Au clusters at low temperatures. Thermal desorption spectroscopy (TDS) measurements on the Pt=YSZ system have been performed and the desorption peaks of CO and O2 have been evidenced. Carbon monoxide desorbs from the surface at a temperature of 535 K and oxygen at 705 K, in good agreement with values reported in literature. Catalytic measurements have confirmed the known strong catalytic activity of Pt. The CO oxidation takes place at temperatures between 450 K and 700 K. The adsorption and desorption temperature of the two educts have been confirmed during the catalysis measurements. Size-selected Aun clusters (n = 5, 7) are deposited from the gas phase at room temperature with well-controlled kinetic energy on rutile TiO2 . Two different surface reconstructions have been used as support: TiO2(110) – (1 × 1) and TiO2(110) – (1 × 2). Systematic studies of morphology, stability and adsorption sites have been performed using scanning tunnelling microscopy (STM). The mean size of the clusters is maintained during deposition at a kinetic energy of 7.1eV per atom, indicating that there is no fragmentation. Au clusters are not stable neither on the TiO2(110) – (1 × 1) nor on the TiO2(110) – (1 × 2) reconstruction during annealing of the substrate to 800 K. A progressive transition into a pronounced 3-d formation is observed. The size distribution of the particles is small and the growth mode (Ostwald ripening) independent of the surface reconstruction. The higher corrugation of the TiO2(110) – (1 × 2) reconstruction results in a pronounced stabilization of the clusters on terraces, in contrast to the TiO2(110) – (1 × 1) reconstruction where 90% of the clusters are found on step edges at elevated temperatures. The catalytic activity of the Au clusters sets in during the 2d - 3d transition. These measurements have to be confirmed and a full understanding of the process should be found.

EPFL2010