Design of Stable Palladium-Based Zeolite Catalysts for Complete Methane Oxidation by Postsynthesis Zeolite Modification
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Catalytic methane oxidation is used in exhaust gas after treatment to reduce methane emissions in stationary combustion processes as well as in natural gas vehicles. Pd/zeolite catalysts provide higher activity than the commonly used Pd/Al2O3, but suffer f ...
This paper presents an exergy and environmental assessment of a 1000 metric t/day ammonia production plant based on the steam methane reforming (SMR) process, including the syngas production, purification (CO2 capture) and compression units, as well as the ...
This doctoral thesis aims at demonstrating the technical feasibility of methane production from microalgae via continuous catalytic supercritical water gasification (CSCWG). This work focuses on three different research approaches: (i) assessment and impro ...
A theoretical case study on steam generation has been performed. Different methods of producing steam by vapour compression, direct electrical heating, gas heating, heat pumping, use of waste heat, and a mixture thereof, were theoretically analysed. The fi ...
An exergy modeling and optimization of an industrial ammonia unit based on steam methane reforming (SMR) process is presented. The base-case unit produces about 1000 t NH3/day [1], as well as power and steam, with no auxiliary exergy use. Some critical ope ...
Natural gas is receiving increasing awareness as fuel for passenger vehicles due to its very low specific CO2 emissions. However, control of CH4 emissions from natural gas combustion in stoichiometric engines requires a specific three-way catalyst (TWC). T ...
Steam is a key energy vector for industrial sites, most commonly used for process heating and cooling, cogeneration of heat and mechanical power as a motive fluid or for stripping. Steam networks are used to carry steam from producers to consumers and betw ...
An exergy modeling and optimization of an industrial ammonia unit based on steam methane reforming (SMR) process is presented. The base-case unit produces about 1000 t NH3/day [1], as well as power and steam, with no auxiliary exergy use. Some critical ope ...
Faculty of Mechanical Engineering, University of Ljubljana2016
The most efficient after-treatment technology for reducing harmful NOx emissions from stationary and mobile sources of diesel exhaust is the selective catalytic reduction (SCR) of NOx with ammonia (NH3). Vanadium-based SCR catalysts reduce NOx selectively ...
This paper presents an exergy and environmental assessment of a 1000 metric t/day ammonia production plant based on the steam methane reforming (SMR) process, including the syngas production, purification (CO2 capture) and compression units, as well as the ...
