A novel microfabrication platform for hybrid multilayer MEMS
Publications associées (66)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Photostructurable epoxy based resists, like SU-8, are soft materials with a Young's Modulus around 4 GPa, which makes them particularly suitable as base material to fabricate Atomic Force Microscopy (AFM) probes for non-destructive analysis of fragile samp ...
The operation of the scanning near-field optical microscope based on the double-resonant montage of a fiber probe onto the tuning fork (working frequency of the latter, that is 32 kHz, coincides with the second resonance frequency of the bending oscillatio ...
SPIE-INT SOC OPTICAL ENGINEERING, PO BOX 10, BELLINGHAM, WA 98227-0010 USA2007
Atomic force microscopy is being increasingly used to explore the physical properties of biological structures. This technique involves the application of a force to the sample and a monitoring of the ensuing deformation process. The available experimental ...
Photostructurable epoxy based resists, like SU-8, are soft materials with a Young's Modulus around 4 GPa, which makes them particularly suitable as base material to fabricate Atomic Force Microscopy (AFM) probes for non-destructive analysis of fragile samp ...
The era of scanning probe microscopy (SPM) started twenty years ago. A cut gold cantilever with a glued diamond stylus served as the scanning probe. Within a few years the crystalline silicon (Si) became the – up to today – predominant SPM probe material. ...
The aim of this study is to develop new methods for landslides mapping and water resources protection and management using geotypes and GIS. The first part of this report deals with the conception and the use of a new methodology for groundwaters’ protecti ...
This chapter addresses the issue of the development of indicators aimed at providing a measurement base with both breadth and depth from which research in the "economics of knowledge" can benefit. While initial attempts at quantification in the area of the ...
Modern communication devices demand challenging specifications in terms of miniaturization, performance, power consumption and cost. Every new generation of radio frequency integrated circuits (RF-ICs) offer better functionality at reduced size, power cons ...
We have designed and fabricated a low-range (ca. 100 mN) thick-film piezoresistive force sensor with a cantilever beam fabricated in LTCC (Low Temperature Co-fired Ceramic). The beam was soldered onto a standard thick-film 25.4 x 12.7 mm signal conditionin ...
Scanning probe microscopy has become, nowadays, a branch of microscopy widely used to image surfaces of different specimens. Among the various applications, the magnetic imaging is one of the most exciting scanning probe microscopy techniques. It allows th ...