Tensile response of low clinker UHPFRC subjected to fully restrained shrinkage
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The tensile behavior under low loading rates governs to a large extend the mechanical response of Strain Hardening Ultra High Performance Fiber Reinforced Concretes (SH-UHPFRC) at early age and long term, in applications of rehabilitation. A viscoelastic-v ...
The effect of silylation of microfibrillated cellulose (MFC) surfaces on β‐phase formation in poly(vinylidene difluoride) (PVDF) and the resulting viscoelastic and dielectric performance of MFC‐PVDF composites is investigated. Two different organosilanes, ...
This paper addresses the uniaxial tensile response of Strain Hardening Ultra High-Performance Fiber Reinforced Concretes (SH-UHPFRC) subjected to very low strain rates and low temperatures. The influence of four different strain rates; 1 × 10−5, 1 × 10−7, ...
2020
,
The tensile response of strain hardening UHPFRC under full restraint, subjected to curing temperatures of 20 °C, 10 °C, 5 °C, was investigated for two types of mixes with silica fume; Mix I with pure type I cement and Mix II with 50% replacement of cement ...
Strain Hardening Ultra High Performance Fiber Reinforced Concretes (SH-UHPFRC) are cementitious materials with exceptional mechanical properties and outstanding durability making them ideal materials for rehabilitation, for the improvement of load carrying ...
Strain Hardening Ultra High Performance Fibre Reinforced Concretes (SH-UHPFRC) have a high elastic limit (around 10 MPa) and high tensile strength (up to 20 MPa) and exhibit significant strain hardening (1 to 4 ‰) under tensile loads. Because of these appe ...
Strain Hardening Ultra High Performance Fiber Reinforced Concretes (SH-UHPFRC) have a high elastic limit (around 10 MPa) and high tensile strength (upto 20 MPa) and exhibit significant strain hardening (1 to 4 %) under tensile loads. These appealing featur ...
Seismic assessment of unreinforced masonry structures remains a challenge. This dissertation investigates the in-plane behavior of historical masonry elements and proposes an advanced simulation method based on the cohesive zone model (CZM) in a finite ele ...
EPFL2018
, ,
PE-UHPFRC is a new Ultra High-Performance Fiber Reinforced Concrete (UHPFRC), which is developed to reduce the environmental impact of conventional UHPFRC by replacing the steel fibers with synthetic ones and reducing the clinker content in the mix. The de ...
2021
Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...
