Publication
Electromagnetic Time Reversal Similarity Characteristics and its Application to Locating Faults in Power Networks
Publications associées (37)
Galvanically Isolated Modular Converter
The ever increasing penetration of renewable energy systems in the distribution grids will inevitably require profound changes in the grid infrastructure. One emerging direction, the medium voltage dc (MVdc) grids, is the cornerstone of this work. They are ...
EPFL2018A Full-Scale Experimental Validation of Electromagnetic Time Reversal Applied to Locate Disturbances in Overhead Power Distribution Lines
Mario Paolone, Marcos Rubinstein, Farhad Rachidi-Haeri, Zhaoyang Wang, Reza Razzaghi
Electromagnetic time reversal (EMTR) has emerged as a promising technique to locate disturbances in power grids, thanks to its location accuracy and robustness against parameters uncertainties. Furthermore, in a reflective medium, like the one of a power n ...
2018Electromagnetic Time Reversal Applied to Fault Location: On the Properties of Back-Injected Signals
Mario Paolone, Zhaoyang Wang, Reza Razzaghi
By using the electromagnetic time reversal (EMTR) theory, the paper studies its properties in order to derive a new fault location method to be used in power networks. It is shown that, in the reversed-time stage, the current signal observed at the true fa ...
Power Systems Computation Conference2018Medium Voltage DC-DC Converter for Power Collection Links
Nowadays electrical energy generation is an important topic discussed in the society. Since technologies like wind or solar energy generation are most of the time placed far away from the city centres one point to focus on is the transmission of the energy ...
EPFL2017Towards self-consistent plasma modelisation in presence of Neoclassical Tearing Mode and sawteeth: effects on transport coefficients
The neoclassical tearing modes (NTM) increase the effective heat and particle radial transport inside the
plasma, leading to a flattening of the electron and ion temperature and density profiles at a given location
depending on the safety factor q ration ...
2017Uncertainty propagation by using spectral methods: A practical application to a two-dimensional turbulence fluid model
To reduce the computational cost of the uncertainty propagation analysis, which is used to study the impact of input parameter variations on the results of a simulation, a general and simple to apply methodology based on decomposing the solution to the mod ...
American Institute of Physics2017Power-System State Estimation based on PMUs
An increasing number of phasor measurement units (PMUs) are being deployed in power systems in order to enhance the situational awareness and, in the near future, we expect that many networks will be extensively equipped with PMUs. These devices provide ac ...
EPFL2017Using Electromagnetic Time Reversal to Locate Faults in Transmission Lines: Definition and Application of the Mirrored Minimum Energy Property
Mario Paolone, Zhaoyang Wang, Reza Razzaghi, Asia Codino
This paper presents an application of the Electro-magnetic Time Reversal (EMTR) in changing media to identify the fault location along a single-conductor transmission line. It is shown that the time-reversed quantities exhibit a property, called Mirrored M ...
2017Fast Simulation of Electromagnetic Transients in Power Systems
The development of modern and future power systems is associated with the definition of new approaches for their simulation, control, and protection. To give an example, the increasing connection of massive renewable energy conversion systems is justifying ...
EPFL2016OTA-C based high-speed analog processing for real-time fault location in electrical power networks
Maher Kayal, François Krummenacher, François Pierre Gaugaz
This paper explores the potential and limitations of analog integrated circuit techniques for the simulation of low-loss or lossless 1D or 2D transmission mediums. In this approach, a transmission line is mapped into a ladder consisting of N identical LC e ...
Springer Verlag2016