Experimental investigation on the deformation capacity of lap splices under cyclic loading
Publications associées (75)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A series of seismic tests were conducted on a 1½-bay by 1½-story special steel moment-resisting frame subassembly from the onset of damage through incipient collapse. These tests were conducted using hybrid simulation with substructuring as a mean to demon ...
Conventional buckling braces are the most commonly used steel bracing systems but are characterized by intense local midlength buckling that leads to unstable energy dissipation and finally fracture. Moreover, they are unable to dissipate energy in the eve ...
Recent earthquakes in Chile (2010, M 8.8) and New Zealand (2011, M 6.3) have shown that, despite many years of extensive research and subsequent design code advancements, several modern reinforced concrete walls underperformed or even failed during these s ...
Although a wealth of knowledge on the behavior of steel moment frame structures has been gained from past experimental studies, there are only a limited number of system-level tests examining seismic response near collapse. Such experimental data is essent ...
International Association of Earthquake Engineering2017
Earthquake loads can induce out-of-plane deformations in thin reinforced concrete (RC) walls that may lead to member out-of-plane failure or cause a premature in-plane collapse. Such instability phenomena have been observed after the recent earthquakes in ...
Concrete-filled steel tube (CFT) columns offer significant advantages over columns made of either steel or concrete alone, such as large energy dissipation and increased strength and stiffness. To further improve the seismic performance of these columns, a ...
This paper evaluates the effectiveness of single and multi-mode nonlinear static procedures (NSPs) as well as the FEMA P58 simplified approach versus rigorous nonlinear response history analyses (NRHA) for estimating seismic demands of steel special moment ...
Construction of multi-storey reinforced concrete (RC) wall buildings in areas of moderate to high seismicity has become a common practice in several Latin-American countries such as Colombia, Peru, Ecuador and Mexico. The large material cost has led to the ...
The severe damage and collapse of many reinforced concrete (RC) wall buildings in the recent earthquakes of Chile (2010) and New Zealand (2011) have shown that RC walls did not perform as well as required by the modern codes of both countries. It seems the ...
Steel concentrically braced frames inherently provide great strength and stiffness, and are widely used for seismic resisting systems in buildings. These include conventional buckling braced frames and buckling restrained braced frames. Although the latter ...