Fabrication and Characterisation of Epitaxial PMN-PT Nano-structures
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Strontium barium niobate (SrxBa1-xNb2O6, shortly SBN) is a solid solution system with tetragonal tungsten bronze crystal structure. It exhibits a ferroelectric phase with only one polar axis and a transition temperature depending on the Sr/Ba ratio. This t ...
The continuous downscaling of microelectronic circuits combined with increasing interest in ferroelectric thin films for non-volatile random access memories (FeRAM) is drawing great attention to small ferroelectric thin film structures. There are various c ...
The quickening pace of the MOSFET technology scaling has pushed the MOSFET dimension towards 10 nanometer channel length, where it is going to face the following fundamental and performance limiting factors: (i) electrostatic limits, (ii) source to drain t ...
Deposition of thin films via hydrothermal method has various advantages: low deposition temperature, high purity, deposition on a three-dimensional structure, and a large thickness. Although an epitaxial lead zirconate titanate (PZT) thin-film deposition h ...
We present the experimental results obtained with a novel monolithic silicon pixel detector which consists in depositing a n-i-p hydrogenated amorphous silicon (a-Si:H) diode straight above the readout ASIC (this technology is called Thin Film on ASIC, TFA ...
Triangular (111) and square-shaped (100) Pb(Zr,Ti)O-3 single crystallites with lateral dimensions down to 50 nm and thickness of 20 nm have been grown using lithography-modulated self-assembly in an in situ sputter process. Epitaxial (111)-oriented Pt on a ...
The possibilities of sub-micron patterning by means of microstencils using pulsed laser deposition were investigated. Stencils with circular and elliptical patterns were used, with pore sizes ranging from 1 mum down to 500 nm. Strontium titanate (SrTiO3), ...
Stencil lithography is an innovative method for patterning that has a great flexibility from many points of view. It is based on shadow mask evaporation using thin silicon nitride membranes that allow the patterning of sub-100 nm features up to 100 μm in a ...
We achieved parallel nanoscale patterning of ferroelectric complex oxides by pulsed laser deposition through a nanostencil (i.e., through a pattern of apertures in a thin free-standing membrane). Ordered arrays of nanostructured barium titanate (BaTiO3) we ...
Growth and properties of sputter in situ sputter deposited Pb(Z,Ti)O-3 (PZT) thin films have been studied on (111)-textured Pt electrodes as a function of seed layers of the type (TiO2)(x)(PbO)(y). The PZT process was run with a limited lead excess resulti ...
