Capacity design principles for the ductile behaviour of conventional and high-performance steel structures under earthquake shaking
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
With the introduction of higher seismic design forces in the Swiss loading standard of 2003 most unreinforced masonry (URM) buildings failed to satisfy the seismic design check. For this reason, in new construction projects, a number of URM walls are nowad ...
Buckling-restrained braced frames (BRBFs) are often used in steel buildings to resist seismic loads; however, BRBF ductility can be limited by poor performance of the beam-column-gusset regions. Additionally, the concentric brace configuration in BRBFs can ...
This paper deals with the development of loading protocols appropriate for cyclic testing in regions of low to moderate seismicity in Europe. To serve this goal, cumulative damage demands imposed by a set of 60 ground motion records, representative of a Eu ...
A thorough four-step performance-based seismic evaluation for a six-story unreinforced masonry building is conducted. Incremental dynamic analysis is carried out using the applied element method to take advantage of its ability to simulate progressive coll ...
In this paper a 2-phase decision tree algorithm is developed to qualitatively predict damage in RC buildings based on earthquake characteristics and structural properties. To this end, the structural properties considered are the natural period of the fund ...
Fragility functions are commonly used in performance-based earthquake engineering for predicting the damage state of a structure subjected to an earthquake. This process often involves estimating the structural damage as a function of structural response, ...
Fragility functions that permit the estimation of damage in pre-1994 welded flange bolted-web beam-to-column moment connections are developed. The fragility functions provide estimates of the probability of yielding and of experiencing fracture as a functi ...
Seismic verification of existing buildings in Switzerland is currently assessed by the pre-standard 2018. In the seismic evaluation of existing buildings in that document, a minimal acceptable seismic safety must be verified, as well as proportional level ...
Braced frames are often used to resist lateral earthquake loads in steel buildings, but braces can interfere with architectural features. Eccentrically braced frames (EBFs) will accommodate windows, doors, and halls, but have performance limitations when l ...
As an approach to the problem of seismic vulnerability evaluation of existing buildings using the predicted vulnerability method, numerical models can be applied to define fragility curves of typical buildings which represent building classes. These curves ...
