Evaluation of Quasi-Static and Dynamic Fracture Toughness on the Low-Alloy Reactor Pressure Vessel Steel JRQ in the Transition Region
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
9-11 wt.%Cr ferritic-martensitic steels with fine carbide structures are considered as potential candidates for the blanket and first wall structures of fusion reactors. Charpy impact tests have been performed in the ductile-to-brittle transition temperatu ...
Temper embrittlement of a 2.25Cr1Mo steel is evaluated by use of small punch testing with disc specimens. Clearly, a ductile-to-brittle transition temperature of the steel may be determined by this test, but the value obtained is much lower than that deter ...
The fracture properties and microdeformation behaviour and their correlation with structure in commercial bulk polyolefins are reviewed. Emphasis is on crack-tip deformation mechanisms and on regimes of direct practical interest, namely slow crack growth i ...
Materials design limits derived so far from the data generated in Europe for the reduced activation ferritic/martensitic (RAFM) steel type Eurofer are presented. These data address the short-term needs of the ITER Test Blanket Modules and a DEMOnstration f ...
Polymethylmethacrylate (PMMA) is used in many applications requiring good optical properties, resistance to ageing and resistance to UV irradiation, in spite of its relatively poor mechanical response to impact loading. In order to extend the range of appl ...
The 10CrMoNbV Manet II cast has been selected as the reference ferritic-martensitic steel in the framework of the European Fusion Technology Programme. Charpy impact tests have been carried out in the ductile to brittle transition temperature range of this ...
We report an experimental investigation of the cutting of a thin brittle polymer sheet with a blunt tool. It was recently shown that the fracture path becomes oscillatory when the tool is much wider than the sheet thickness. Here we uncover two novel trans ...
We investigate the plastic flow properties at low and high temperature of the tempered martensitic steel Eurofer97. We show that below room temperature, where the Peierls friction on the screw dislocation is active, it is necessary to modify the usual Tayl ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
The fracture behavior of composite rubber particle-toughened polymethylmethacrylate has been investigated over a wide range of test speeds, encompassing impact conditions. When the entanglement density of the matrix was increased and its glass transition t ...
