Performance of chip-scale optical frequency comb generators in coherent WDM communications
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A photoacoustic sensor using a laser diode emitting near 1532 nm in combination with an erbium-doped fibre amplifier has been developed for ammonia trace gas analysis at atmospheric pressure. NH3 concentration measurements down to 6 ppb and a noise-equival ...
We designed and built a highly scalable incoherent optical CDMA testbed for Lockheed Martin as a novel platform for testing different avionics applications. It enables users to communicate with each other at OC-24 including transfer of data at ~1.25 Gbit/s ...
A Hall sensor comprises a Hall element (1; 30; 31; 60) and an amplifier (2; 32; 33). The Hall element is placed inside the amplifier so that the current flowing through the Hall element also flows through the transistors of an amplifier stage of the amplif ...
We present a surface-normal modulator architecture for optical interconnects that offers misalignment tolerance as well as high contrast ratio over a wide wavelength range for a small drive voltage. A contrast ratio greater than 3 dB was achieved for only ...
Over the past decade a new family of optoelectronic devices has emerged whose performance is enhanced by placing the active device structure inside a Fabry–Perot resonantmicrocavity [P. E. Green, IEEE Spectrum 13 (2002)]. The increased optical field allows ...
The differential pair is one of the basic amplifying stages in amplifier design. Aiming at the the design of low-distortion amplifiers, a simple model for a differential pair is derived using the Volterra series. The parameters in this model correspond to ...
The failure of a single optical link or node in a Wavelength Division Multiplexing (WDM) network may cause the simultaneous failure of several optical channels. In some cases, this simultaneity may make it impossible for the higher level (SONET or IP) to r ...
We report here the fabrication of fiber chromatic dispersion compensators, along with the tests of those components in wavelength-division-multiplexed transmission at 10 Gb/s and an analysis of their performance by simulation. ...
Institute of Electrical and Electronics Engineers1999
In the ever-growing world of optical telecommunications. Semiconductor Optical Amplifiers (SOAs) are called to play an increasingly important role. Their attractive performances both in the linear and non-linear regime along with their reduced cost and sma ...
In this work, by means of numerical simulations, we verify that four‐wave mixing (FWM) processes, including depletion and parametric gain, generate a redistribution of pump power in distributed fiber Raman amplifiers (DFRAs). As a consequence of pump‐pump ...
