Modelling reinforced concrete coupling beams designed for low-to-moderate seismic regions Author: Lisa
Publications associées (45)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A unidirectional shake-table test was performed on the half-scale prototype of a natural stone masonry building aggregate, to investigate the seismic performance of this type of historical construction and to assess the effectiveness of two retrofit soluti ...
The response of concrete gravity dams under seismic loads is a major concern of dam safety assessment in earthquake-prone areas. This study focuses on the seismic analysis of the tallest non-overflow monolith of Pine Flat Dam. The paper presents results of ...
This paper describes a research program involving wood-sheathed and cold-formed steel (CFS) framed diaphragm assemblies.The diaphragm’s response to in-plane monotonic and reversed cyclic lateral loading is investigated in an effort to characterize the seis ...
A series of seismic tests were conducted on a 1½-bay by 1½-story special steel moment-resisting frame subassembly from the onset of damage through incipient collapse. These tests were conducted using hybrid simulation with substructuring as a mean to demon ...
Current simplified design methods for buildings with supplemental damping devices are mainly based on single-degreefreedom (SDF) shear-models. Common errors of such methods are attributed to the linearization of nonlinear damping and stiffness, higher buil ...
Splicing of longitudinal reinforcement in the plastic hinge region of reinforced concrete (RC) members was common practice in buildings and bridges before the introduction of capacity design principles. Experimental and field observations showed that the p ...
Existing steel frame buildings in Switzerland that have been designed from the early 1970s typically utilized a steel lateral load resisting system with practically no seis- mic design requirements. However, Switzerland is a moderate seismicity zone and th ...
Nonlinear dynamic (response history) analysis is being used increasingly in design practice for the performance-based seismic design of buildings. In contrast to nonlinear static analysis, dynamic analyses require more explicit modeling of cyclic response ...
Baudynamik und Erdbebeningenieurwesen sind im Lehrplan des Bauingenieurwesens an der EPFL gut verankert. Baudynamik ist eine von nur fünf Pflichtveranstaltungen im Masterstudiengang und der Vorlesung muss daher von allen Studenten besucht und bestanden wer ...
Although a wealth of knowledge on the behavior of steel moment frame structures has been gained from past experimental studies, there are only a limited number of system-level tests examining seismic response near collapse. Such experimental data is essent ...
International Association of Earthquake Engineering2017