Comparative characterisation of non-monodisperse gold nanoparticle populations by X-ray scattering and electron microscopy

Accurate nanoparticle size determination is essential across various research domains, with many functionalities in nanoscience and biomedical research being size-dependent. Although electron microscopy is capable of resolving a single particle down to the sub-nm scale, the reliable representation of entire populations is plagued by challenges in providing statistical significance, suboptimal preparation procedures and operator bias. While alternative techniques exist that provide ensemble information in solution, their implementation is generally challenging for non-monodisperse populations. Herein, we explore the use of small-angle X-ray scattering in combination with form-free Monte Carlo fitting of scattering profiles as an alternative to conventional electron microscopy imaging in providing access to any type of core size distribution. We report on a cross-method comparison for quasi-monodisperse, polydisperse and bimodal gold nanoparticles of 2-7 nm in diameter and discuss advantages and limitations of both techniques.

Fluorescent Nanodiamond–Gold Hybrid Particles for Multimodal Optical and Electron Microscopy Cellular Imaging

Theo Lasser, Weina Liu, Miguel Sison

There is a continuous demand for imaging probes offering excellent performance in various microscopy techniques for comprehensive investigations. of cellular processes by more than, one technique. FluoreScent nanodianiond gold nanoparticles (END Au) constitute a new class of "all in -one" hybrid particles providing.unique features fOr multimodal imaging including optical imaging, eleCtron microscopy, and, and potentially even quantum, sensing. COnfocal and optical coherence microscopy of the END Au allow fast investigations inside living cells via emission, scattering, and photothermal imaging techniques because, the END 'emission is not quenched by AuNPs. In electron microscopy, transmission electron microscopy (TEM) and. scanning transmission electron microscopy (STEM) analysis of END Au reveals greatly enhanced contrast due to the gold particles as well as an extraordinary flickering behavior in three-diniensional Cellular environments originating from the nanodiamonds. The unique multimodal imaging characteristics of END Au enable detailed studies inside cells ranging from statistical distributions at the entire cellular level (micrometers) down to the tracking of individual particles in sub cellular organelles (nanometers). Herein, the processes of endosomal membrane uptake and release of FNDs were elucidated for the first time by the imaging of individual END Au hybrid nanoparticles with single-particle resolution. Their convenient preparation, the availability of various surface groups, their flexible detection modalities, and their single-particle contrast in combination with the capability for endosomal penetration and low cytotoxicity make FND Au unique candidates for multimodal optical electronic imaging applications with great potential for emerging techniques, such as quantum sensing inside living cells.

Amer Chemical Soc2016

Etude par microscopie électronique de particules nanostructurées d'oxalate de cobalt précipitées en milieu aqueux

The understanding of material self-assembling and self-organization mechanisms, at mesoscale, is crucial for nanotechnologies development. Such structures, hierarchically organized in superlattices or colloïdal crystals, are observed in inorganic or organo-metallic precipitates. The classical characterization, using electron microscopy and X-ray diffraction, of a synthesized powder is inadequate to describe the hierarchically organized polycrystalline structure of the final particles. Here, we have highlighted the successive steps that lead to the spontaneous formation of a cobalt oxalate dihydrate (COD) colloïdal crystals that precipitate in aqueous media. The characterization of the final particles, made by X-ray and electronic diffraction, has allowed us to determine the controversial crystalline phase of the precipitated COD. The β and γ COD phases has been discriminated by comparing experimental results with simulations of X-ray diffractogram and electron diffraction patterns for these both structures. The precipitated COD corresponds to the γ phase indicating that it comes from solid dehydration of cobalt oxalate tetrahydrate. The final powder characterization, performed by X-ray diffraction (XRD), atomic force microscopy (AFM), low voltage high resolution scanning electron microscopy (LVHRSEM) and transmission electron microscopy (TEM), gives some diverging results about monocrystalline or polycrystalline nature of the precipitates. XRD and AFM analysis show a polycrystalline structure of particles whereas LVHRSEM, TEM and electron diffraction observations indicate a monocrystalline structure. This apparent contradiction has led us to elaborate a new characterization method allowing to follow the growth and the structural evolution of the precipitate as a function of time. The cryo- preparation techniques are well adapted as they allow freezing and direct observation of solid state suspension by electron microscopy. The freeze/drying method has been modified and used for both SEM and TEM, and has allowed us to study the morphological and structural evolution of the COD precipitate from nanoscale to mesoscale. In addition, TEM analysis of samples prepared by classical techniques has been performed to complement cryo-electron microscopy observations. The combination of these two methods show that COD precipitation is a complex multi-step process leading to the formation of a core/shell heterostructure. The anisotropic core is porous and partially crystalline. It is formed by agglomeration of isolated primary particles and agregated ones (15-20 nm sized secondary particles). The crystalline shell corresponds to the final particles faces and is made up by the layer by layer self-assembling and alignment of 5-7 nm sized crystalline primary particles. These nanoparticles are aligned and perfectly ordered in strings of nanograins in the layer structure. The self-assembling occurs in the last step of growth where we have a lower ionic strength and supersaturation inducing slower kinetics of growth and aggregation. Moreover, the crystalline order in the primary and secondary particles increase with the time of reaction consistent with a continuous process of primary particle nucleation and growth. Our results show that self-assembling occurs layer by layer with terraces, kinks and steps that are present on the faces. This reminds the layer by layer crystalline growth models but in this case, the buiding blocks are colloïdal instead of atomic or molecular. Based on these different results, we propose an original model describing the COD precipitate growth. In addition, we have studied the poly(methacrylic acid-sodium salt) effect on the COD precipitation. This additive (PMMA) appeared to be a very good growth inhibitor. The PMMA effect on the final particles morphology is dramatic. Its concentration variation in solution slows down the nanoparticles aggregation rates along a [101] preferential direction. The crystal habit can then be controlled and we have synthesized platelets, cubes and rods with tailored length. The use of cryogenic electron microscopy has been shown to be a powerful tool for the understanding of time dependent aspects of particle growth. The use of such techniques for the study of other systems, where the final precipitate appearance may hide particle substructures, will help to elucidate growth mechanisms and allow finer control of nanostructured materials for many applications. The complex self-assembling and self-organization processes could then be highlighted and studied on a nanometer to micrometer scale.

EPFL2004

Analysis of nano-sized irradiation-induced defects in Fe-base materials by means of small angle neutron scattering and molecular dynamics simulations

Gang Yu

Thermonuclear fusion of light atoms is considered since decades as an unlimited, safe and reliable source of energy that could eventually replace classical sources based on fossile fuel or nuclear fuel. Fusion reactor technology and materials studies are important parts of the fusion energy development program. For the time being, the most promising materials for structural applications in the future fusion power reactors are the Reduced Activation Ferritic/Martensitic (RAFM) steels for which the greatest technology maturity has been achieved, i.e., qualified fabrication routes, welding technology and a general industrial experience are almost available. The most important issues concerning the future use of RAFM steels in fusion power reactors are derived from their irradiation by 14 MeV neutrons that are the product, together with 3.5 MeV helium ions, of the envisaged fusion reactions between deuterium and tritium nuclei. Indeed, exposure of metallic materials to intense fluxes of 14 MeV neutrons will result in the formation of severe displacement damage (about 20-30 dpa per year) and high amounts of helium, which are at the origin of significant changes in the physical and mechanical of materials, such as hardening and embrittlement effects, for instance. This PhD Thesis work was aimed at investigating how far the Small Angle Neutron Scattering (SANS) technique could be used for detecting and characterizing nano-sized irradiation-induced defects in RAFM steels. Indeed, the resolution limit of Transmission Electron Microscopy (TEM) is about 1 nm in weak beam TEM imaging, and it is usually thought that a large number of irradiation-induced effects have a size below 1 nm in RAFM steels and that these very small defects actually contribute to the irradiation-induced hardening and embrittlement of RAFM steels occurring at irradiation temperatures below about 400°C. The aim of this work was achieved by combing SANS experiments on unirradiated and irradiated specimens of RAFM steels with Molecular Dynamics (MD) simulations of main expected nano-sized defects in irradiated pure Fe and Fe-He alloys, as model materials for RAFM steels, and simulations of their corresponding TEM images and SANS signals. In particular, the SANS signal of various types of defects was simulated for the first time. The methodology used in this work was the following: SANS experiments were performed by applying a strong saturating magnetic field to unirradiated and irradiated specimens of three types of RAFM steels, namely the European EUROFER 97, the Japanese F82H and the Swiss OPTIMAX A steels. The available irradiated specimens included specimens which had been irradiated with 590 MeV protons in the Proton IRradiation EXperiment (PIREX) facility at the Paul Scherrer Institute (PSI) at temperatures in the range of 50-350°C to doses in the range of 0.3-2.0 dpa. SANS spectra as well as values of the so-called A ratio, which represents the ratio of the total scattered intensity to the nuclear scattered intensity, were obtained for the various irradiation doses and temperatures investigated. MD simulations of atomic displacement cascades in pure Fe and in Fe-He alloys were performed using Embedded Atom Method (EAM) many-body interatomic potentials. The main nano-sized defects that should be produced in RAFM steels under irradiation were created by means of MD in pure Fe. These included dislocation loops of various types, voids, helium bubbles with various He concentration and Cr precipitates. TEM images of cascade damage and all the defects created by MD were simulated in the dark field/weak beam imaging modes by using the Electron Microscopy Software (EMS) developed by P.A. Stadelmann (EPFL) and analyzed in terms of variations of contrast intensities versus depth inside the specimen. The SANS signal provided by cascade damage and all the defects created by MD was simulated by using a slightly modified version of EMS, accounting for neutrons instead of electrons. The SANS technique has been proven in this work to be a very powerful tool for detecting nano-sized irradiation-induced defects and a tool well complementary to TEM for characterizing such very small irradiation-induced defects. Indeed, TEM appears most adapted to investigate structural defects, such as dislocation loops and helium bubbles with high helium concentration, which yield significant lattice deformation of the surrounding matrix, while SANS is most adapted to investigate phase defects, such as voids, helium bubbles with low helium concentration and Cr precipitates. By combining the results of SANS experiments with those of MD simulations, TEM image simulations and SANS signal simulations, the nano-sized irradiation-induced defects were tentatively identified as small helium bubbles. While the radiation hardening measured for RAFM steels cannot be explained by accounting only for the defects observed in TEM, it could be successfully modeled by accounting also for a reasonable number density of the nano-sized defects evidenced using the SANS technique.

EPFL2008