CO2 chemical transformations using metal-organic frameworks

During the last decades, intensive efforts have been applied to tackle the enormous emissions of CO2 into atmosphere. These efforts include not only developing efficient carbon capture techniques, but also the introduction of new ways to transform the captured CO2 into the valuable products. In this context, numerous catalytic systems have been developed for the reduction of CO2. Typically, homogeneous systems provide better selectivity, due to more precise control of the chemical properties of the catalytic moiety, and require milder reaction conditions, compared to the currently employed heterogeneous catalysts. However, the majority of industrial chemical processes deploy heterogeneous catalytic systems, as their comparative stability and facile separation of the products from the catalyst facilitates scale-up and continuous production. Therefore, the crucial vector of successful transfer of the newest achievements in chemical catalysis lies in merging the advantages provided by homogeneous catalysts with the benefits of heterogeneous systems. Metal-organic frameworks (MOFs) are crystalline materials formed by the self-assembly of metal ions or clusters with organic ligands and possess unique merits, such as extremely high surface area, uniform and tunable porous structure, wide opportunities for rational design. Amalgamation of the newly developed concepts, such as FLP chemistry, showing promising results in activation of CO2, as well as recent advances in conventional catalysis with MOFs should allow the advantages of MOFs as materials with directed assembly to converge with the versatile needs of a catalytic material an improve the potential for application of them both in industry and chemical synthesis. This thesis describes the implementation of the FLP concept into MOFs. A proof of a concept, demonstrating feasibility and potential applicability of this approach for CO2 fixation is followed by the development and evaluation of a recyclable and water tolerant heterogeneous MOF catalyst for FLP-mediated reduction of CO2. Additionally, MOF-based catalysts, employing incorporated functionalities and supported metal nanoparticles, were accessed for CO2 conversion.

Synthetic methodologies for C-C and C-N bond formation involving alkyl radicals

Guido Barzanò

C-C and C-N bonds are some of the most common structures in molecules ranging from drugs to catalysts and to food additives. Many coupling reactions were developed to form these types of bonds with excellent selectivity and good performance. Still, the synthesis of some of those species either depends on traditional methods or requires expensive and rare reagents and catalysts. The use of precious metals in chemistry, and particularly in the industry, can make molecular synthesis expensive and energy-intensive since the extraction of those materials is costly. Moreover, in homogeneous catalysis, the recovery of metal-based catalysts is almost impossible, making these processes unsustainable for the future. Thus, the discovery of chemical reactions that donât involve precious materials is indispensable. This thesis concentrates on the development of two chemical transformations, one performing an sp2-sp3 radical reductive coupling, one performing a photocatalyzed alkyl amination, involving inexpensive reagents and catalysts. The first chapter reviews the existing methodologies which use alkyl radicals to form carbon-carbon and carbon-nitrogen bonds. Alkyl radicals are formed from alkyl halides and pseudo-halides (Acids, esters, tosylates, etc.) via oxidation or reduction performed by metal or photoredox catalyst. The wide variety of available methodologies was illustrated, highlighting the advantages and weaknesses of each reaction. The second chapter of this dissertation is devoted to the development of a new iron-based catalytic method to form stereoselectively Z-alkene boron species from the corresponding boron-alkyne. This novel stereoselective method opens a new way to obtain these types of molecules with cheap reagents, in high yields, with excellent stereoselectivity (Z:E ratio >10:1), and with good tolerance of functional group. The reaction is radical based, avoiding the problem of beta-hydride elimination, which usually occurs in ionic reactions involving metal centers. In order to prove the versatility of this method, the vinyl boron compound formed from this reaction was used for further functionalizations. The formal total synthesis of a 5-HT2c receptor agonist was successfully performed, improving the overall yield of the process, and avoiding the use of expensive and polluting chemicals. The third chapter of this thesis is concentrated on the development of a tandem photoredox/metal base catalyzed functionalization of anilines and imines with alkyl carboxylic esters. In this reaction, no late transition metal is used, and the traditional metal-based photocatalyst is substituted with an inexpensive and more efficient organic dye. The alkylation of amines is a challenging topic in organic chemistry and classical nucleophilic substitution lacks selectivity and scope. Harvesting visible light with a photoredox catalyst opens the possibility to a radical pathway, making this coupling easy and with high tolerance for functional groups. In order to understand the catalytic cycle of the reaction, additional mechanistic studies were conducted, leading to some insight on how this reaction works.

EPFL2020

Chemical and electrochemical promotion of supported rhodium catalyst

Olena Baranova

The chemical and electrochemical promotion of highly dispersed nanofilm Rh catalysts (dispersion: about 10 %, film thickness: 40 nm) has been investigated for the first time. To this end Rh metal was sputter-deposited, either on a purely ionic conductor (8 % Y2O3-stabilized ZrO2) or on a mixed ionic-electronic conductor (TiO2), the latter being a highly dispersed layer of TiO2 (4 µm) deposited on YSZ. These catalysts are designated as Rh/YSZ and Rh/TiO2/YSZ, respectively. It was established analytically that both in the Rh/YSZ and in the Rh/TiO2/YSZ system, the catalyst films have a nanoparticle-size grain structure. The Rh supported on titania is rather porous, exhibiting a higher dispersion and surface area than Rh on YSZ. Both after reduction (H2, T=400 °C) and after oxidation (O2, T=400 °C), Rh supported on TiO2 was found to be in a more highly reduced state than Rh on YSZ. After reducing treatment, the Rh/TiO2/YSZ samples contain a larger amount of weakly bonded oxygen, which can be attributed to oxygen "backspillover" from the TiO2. A major feature of this research was the electrochemical characterization of the oxygen/Rh/solid electrolyte three-phase boundary by steady-state polarization measurements and by impedance spectroscopy. These are powerful techniques for extracting experimental trends and details that are useful for an understanding of the electrochemical promotion principles. It was shown that the exchange current densities at the Rh/solid electrolyte interface are lower on account of the TiO2 layer. The exchange current densities are more than twice lower at Rh/TiO2(4 µm)/YSZ than at Rh/YSZ, demonstrating that the former interface is much more polarizable. The mechanism of oxygen exchange occurring close to equilibrium (O2/O2- couple) was investigated for the first time at Rh catalyst electrodes interfaced with solid electrolyte. The processes of cathodic oxygen reduction and anodic oxygen evolution are not symmetric, but they are similar in the two systems, Rh/YSZ and Rh/TiO2(4 µm)/YSZ. The cathodic process consists of three steps: dissociative adsorption of oxygen at the gas-exposed Rh surface, atomic oxygen diffusion to the electrochemical reaction sites (ERS), and a two-electron transfer to this oxygen on the ERS. The cathodic process is limited by interfacial diffusion of oxygen atoms from the gas-exposed metal surface to the ERS. The anodic process includes two steps: two-electron transfer reaction, which is the rate-determining step, and oxygen desorption to the gas phase. With data obtained from impedance spectroscopy at the equilibrium potential, it was possible to confirm the reaction scheme proposed. It was demonstrated that Rh nanofilm catalysts interfaced with YSZ or TiO2/YSZ can be electrochemically promoted for the reaction of ethylene oxidation. Small anodic currents cause periodic oscillations in catalytic rate and potential of the Rh/YSZ catalyst, while at Rh/TiO2/YSZ they give rise to a stable and reversible rate enhancement by up to a factor 80. The increase in ethylene oxidation rate is up to 2000 times larger than the electrochemical rate, I/2F, of O2- oxidation. The pronounced electrochemical promotion behavior that has been observed is due to the anodically controlled migration of O2- species from the electrolyte to the Rh/gas interface. At the Rh surface, these species destabilize the formation of rhodium surface oxide (Rh2O3). The existence of backspillover oxygen species has been confirmed by impedance measurements under positive applied potential. Another significant result for heterogeneous catalysis is the finding that thick as well as thin films of Rh/TiO2/YSZ catalyst are open to chemical promotion of ethylene oxidation and partial methane oxidation, ie, they offer a higher catalytic activity and stability than the Rh/YSZ catalysts. The modification of catalytic activity observed for Rh/TiO2/YSZ was attributed to either a "long-range" electronic-type SMSI mechanism or to a self-driven electrochemical promotion mechanism. In both cases, the ultimate cause of promotion are different work functions of catalyst and support. Equilibration of the work functions of two solids in contact induces surface charging, a migration of O2- ions to the catalyst/gas interface, and a weakening of the Rh-O chemisorptive bonds. It facilitates reduction of oxidized surface sites. Another important achievement of the present work was that of exploring and confirming the possibilities of current-assisted activation of Rh/TiO2/YSZ catalysts. In partial methane oxidation using close to stoichiometric gas compositions (CH4 : O2 = 2 : 1) at 550 °C, the inactive (oxidized) Rh/TiO2/YSZ catalyst was successfully activated by applied currents, either positive or negative. This phenomenon is an example of "permanent" electrochemical promotion furnishing a permanent rate enhancement ratio of γ = 11. The activation by negative currents is explained in terms of an electrochemical reduction of rhodium surface oxide, while the activation by positive currents can be explained by the mechanism of electrochemical promotion.

EPFL2005

Nanostructured Electrocatalysts for Water Splitting Reactions

Lucas-Alexandre Stern

At the dawn of the 21st century, mankind is facing an important energy challenge. Future energy demand can only be met by large scale exploitation of renewable energy resources. Solar energy is abundant, with a sufficient capacity for the growing energy demand. However, it is necessary to implement renewable energy storage means. Hydrogen is considered as the energy carrier of the future. An energy economy based on hydrogen is viable only if hydrogen is produced from sustainable means. Water electrolysis is the most promising technique to produce hydrogen directly from water. Yet, the efficiency is limited and electrocatalysts are required to drive both the hydrogen evolution reaction and oxygen evolution reaction. Scarce and expensive materials are currently used to drive these reactions. It is, thus, imperative that efficient Earth-abundant catalysts are developed. Nanostructuring enhances the performance of inexpensive materials for water splitting and several catalysts were studied for this goal. Chapter 2 describes the application of nanostructuring technique to the archetypical catalysts that are nickel oxides for oxygen evolution. The prepared nanoparticles show superior activity towards oxygen evolution than that of their bulk counterpart. The ultrafine size of nanoparticles synthesized allowed the exposure of a higher number of active sites. The activity for oxygen evolution was, thus, significantly enhanced. We also detailed that short conditioning of the electrode improved the performance of the evaluated materials. In chapter 3 we carefully studied nanoparticles and nanowires of nickel phosphide. The catalysts is known to be really active for hydrogen evolution. Our group suspected that this material was, also, a potential oxygen evolution catalyst. We proved, for the first time, that nickel phosphide is a remarkable oxygen evolution catalyst. Under alkaline conditions, used for oxygen evolution, we observed an in-situ formation of a core-shell heterostructure, a typical nanostructure architecture. The surface oxidation of this material allowed high oxygen evolution capabilities. We concluded that careful oxidation of nanostructured materials, as observed for nickel phosphide, is essential for the preparation of future outstanding oxygen evolution catalysts. Chapter 4 details the fabrication of direct solar-to-fuel electrode using cobalt phosphide as hydrogen evolving catalyst. Instead of using the electrical energy provided by solar energy, solar irradiation on the developed assembly allows direct hydrogen production. The careful design of the light-sensitive electrode (photocathode) is detailed. Simple incorporation of cobalt phosphide by means of photodeposition alleviates the cost of the electrode fabrication. The assembled electrode is active for hydrogen evolution under visible light irradiation. In the chapter 5 we sought to fabricate a 3-dimensional hydrogen evolving catalyst. This nanostructure is based on polymer brushes on a flat conducting substrate. Once the brushes are grown on the substrate, a molybdenum sulfide catalyst is then incorporated by simple soaking technique. We were able to tune the loading of the catalyst and the corresponding activity by changing the polymer properties. The height of the polymer was modified as well as its packing density. The resulting activity proved superior to similar approaches and to previous reports on carefully engineered molybdenum sulfide catalysts.

EPFL2017