Publications associées à Computational parametric analysis of the design of cross-flow turbines under constraints

Enhancing Wind Farm Performance through Axial Induction and Tilt Control: Insights from Wind Tunnel Experiments

Fernando Porté Agel, Guillem Armengol Barcos

Static axial induction control and tilt control are two strategies that have the potential to increase power production in wind farms, mitigating wake effects and increasing the available power for downstream turbines. In this study, wind tunnel experiment ...

Basel2024

Wind farm power density optimization according to the area size using a novel self-adaptive genetic algorithm

Fernando Porté Agel, Nicolas Otto Kirchner Bossi

This work studies the power density (PD) optimization in wind farms, and its sensitivity to the available area size. A novel genetic algorithm (PDGA) is introduced, which optimizes PD and the turbine layout, by self-adapting to the PD and to the solutions ...

Oxford2023

Discretization Uncertainties of Flow and Fatigue Damage Simulations of a Reversible Francis Pump-Turbine at Off-Design Operation in Turbine Mode

Drazen Dujic, Daniel Biner, Philippe Alexandre Bontemps

In the framework of the XFLEX HYDRO H2020 European Project, a 5 MW reversible Francis pump-turbine prototype, equipped with an industrial full size frequency converter, is investigated to demonstrate enhanced grid regulation capacities of variable speed hy ...

SPRINGER INTERNATIONAL PUBLISHING AG2022

Numerical investigation on the volute cutwater for pumps running in turbine mode

Elena Vagnoni, Alessandro Morabito

The hydropower sector has recently raised the interest in pump as turbine (PaT) that can be a valid trade-off between capital cost and performance in micro-scale installations. Nevertheless, the modest efficiency of PaTs often restricts their exploitation. ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Application of particle-based numerical analysis to the practical design of Pelton turbine

François Avellan, Siamak Alimirzazadeh, Takashi Kumashiro

For the design optimization of the Pelton turbine, it is highly demanded to investigate the flow inside the turbine casing, which includes the water jet from the nozzles, the interaction between the jet and rotating runner, and the flow ejected from the bu ...

IOP PUBLISHING LTD2021

Theoretical and Experimental Investigation of a 34 Watt Radial-Inflow Steam Turbine with Partial-Admission

Jan Van Herle, Jürg Alexander Schiffmann, Patrick Hubert Wagner

A micro steam turbine with a tip diameter of 15 mm was designed and experimentally characterized. At the nominal mass flow rate and total-to-total pressure ratio of 2.3 kg/h and 2, respectively, the turbine yields a power of 34 W and a total-to-static isen ...

2020

GPU-accelerated numerical analysis of jet interference in a six-jet Pelton turbine using Finite Volume Particle Method

François Avellan, Ebrahim Jahanbakhsh, Audrey Paulette Solange Maertens, Sebastián Camilo Leguizamón Sarmiento, Siamak Alimirzazadeh, Christian Vessaz, Takashi Kumashiro

The Pelton turbine is an impulse turbine typically installed for high head hydroelectric power plants. For a site with a rated head H and discharge Q, a higher specific speed turbine results in a more compact generating unit with reduced manufacturing cost ...

2020

Hill chart modelling using the Hermite polynomial chaos expansion for the performance prediction of pumps running as turbines

François Avellan, Loïc Andolfatto, João Nuno Gomes Borga Delgado

Pumps running as turbines are suitable hydraulic machines for micro hydropower applications. The selection of the proper pumps to install in a given site still remains a major challenge, as pump manufacturers do not provide the characteristic curves data i ...

2019

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Computational parametric analysis of the design of cross-flow turbines under constraints

Graph Chatbot

Chattez avec Graph Search