Publication

Post-irradiation examination of refractory metal candidates for antiproton targets at the European Laboratory for Particle Physics (CERN)

Elvis Fornasiere
2020
Thèse EPFL
Résumé

The AD-target (Antiproton Decelerator Target) is the main antiparticle production element of the CERN’s (European Organization for Nuclear Research) AD (Antiproton Decelerator) complex. Antiprotons are produced by colliding a pulsed 1.5 * 10^13 ppp (protons per pulse) proton beam of 26 GeV/c momentum from CERN PS (Proton Synchrotron) with a fixed target made of a dense and high-Z material.

However, one major surprising issue is observed. A significant drop in the antiproton production takes place after few days of operation of a new target. For the time being, the real causes of this drop have not been clearly identified. In the framework of the ELENA (Extra Low Energy Antiproton Ring) project, a new upgrade of the CERN AD facility was initiated in 2016. In the context of optimization of the full antiproton production system, an important part of the upgrade involves the redesign of the antiproton target itself. In order to address specific requirements for the new designs and operational procedures, a deep understanding of the target system under irradiation of its evolution with time has to be carried out. The aim is to enhance its performance, reliability and ultimately improve the antiproton production yield.

Two main phenomena have been retained as major damaging concerns for target operation: (i) initially, shock waves as a consequence of the sudden increase of temperature in the target material after each pulse and (ii) in the long term, radiation damage (like voids and bubble creation, gas formation, swelling, embrittlement, etc.). The approach adopted in this work consists in investigating the changes of the microstructure due to the thermally induced stress waves and long-term radiation damage by linking them to the consequent changes of mechanical properties of such materials as well as to the antiproton yield reduction. The main studies focus on iridium, tantalum and tungsten-based materials, with an opening to other materials for comparison.

PIEs (Post-Irradiation Examinations) are performed on targets extracted from the so-called HiRadMat-27 and HiRadMat-42 experiments, together with the opening of one spent AD-target. The objective aimed at understanding the phenomena of material damage occurring in such devices. PIEs consisted in the use of classical metallurgical techniques, such as LOM (Light Optical Microscopy), SEM (Scanning Electron Microscopy) and EBSD (Electron Backscatter Diffraction), XRD (X-Ray Diffraction), in order to highlight possible changes induced in the microstructure. The analyses were completed with micro- and nano-indentation tests, which could allow to show the effects of the proton impact induced-changes (thermally induced stress waves and irradiation).

Post-mortem analyses of the targets of the HiRadMat-27 and HiRadMat-42 experiments show that this damage occurs very rapidly after only a few pulses. In the HiRadMat-27 experiment, all materials (except tantalum) exhibited cracks. The HiRadMat-42 experiment has shed light on the process of spalling damage that occurs for ductile materials such as tantalum in dynamic regime. The opening of the AD-target has shown that the state of iridium is fragmented on several levels. The conclusion of this thesis is that, in the current regime of the AD-target, the effects of thermally-stress waves are the dominant factor in the production of damage in the AD-target.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Concepts associés (36)
ALPHA (expérience)
vignette|Expérience ALPHA au CERN La Collaboration ALPHA (Antihydrogen Laser PHysics Apparatus) est une expérience menée par une équipe de physiciens composée de scientifiques venant d'un grand nombre d'institutions différentes. Elle a pour but de piéger l'antimatière neutre sous la forme d'antihydrogène dans un piège magnétique, puis de mener des expériences sur les antiatomes qui auront été piégés. Le but de ces expériences est de tester la symétrie CPT au travers de comparaisons des spectres des atomes d'hydrogène et d'antihydrogène.
Organisation européenne pour la recherche nucléaire
L’Organisation européenne pour la recherche nucléaire, aussi appelée laboratoire européen pour la physique des particules et couramment désignée sous l'acronyme CERN ou Cern (du nom du Conseil européen pour la recherche nucléaire, organe provisoire institué en 1952), est le plus grand centre de physique des particules du monde. Il se situe à quelques kilomètres de Genève, en Suisse, à cheval sur la frontière franco-suisse, sur les communes de Meyrin, Prévessin-Moëns et Saint-Genis-Pouilly.
Proton Synchrotron
The Proton Synchrotron (PS, sometimes also referred to as CPS) is a particle accelerator at CERN. It is CERN's first synchrotron, beginning its operation in 1959. For a brief period the PS was the world's highest energy particle accelerator. It has since served as a pre-accelerator for the Intersecting Storage Rings (ISR) and the Super Proton Synchrotron (SPS), and is currently part of the Large Hadron Collider (LHC) accelerator complex. In addition to protons, PS has accelerated alpha particles, oxygen and sulfur nuclei, electrons, positrons, and antiprotons.
Afficher plus
Publications associées (55)

Quantum engineering and detection of advanced radiation beams

Veronica Leccese

Controlling and shaping radiation beams is fundamental for a better understanding of radiation-matter interaction and advancing experimental techniques for material characterization at high spatial resolution.In particular, the current trend in the miniatu ...
EPFL2023

Design, prototyping, and thermo-mechanical modelling of a neutron spallation target impacted by high-energy proton-beam pulses in the n_TOF facility at CERN

Raffaele Esposito

This manuscript describes the design work and the R&D activities carried out for the third-generation neutron production target in the neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN). The facility is composed ...
EPFL2022

Description of beam instabilities in synchrotrons with wakefields and space charge forces using the circulant matrix model

Xavier Buffat, Tatiana Pieloni, Adrian Oeftiger

A new model for the description of beam instabilities in synchrotrons featuring wakefields and space charge forces is proposed, using the circulant matrix approach. The predictions of this model are discussed in light of past ones, with a particular emphas ...
AMER PHYSICAL SOC2021
Afficher plus
MOOCs associés (18)
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Plasma Physics: Applications
Learn about plasma applications from nuclear fusion powering the sun, to making integrated circuits, to generating electricity.
Afficher plus

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.