Publication

The ratio of shear to elastic modulus of in-plane loaded masonry (vol 53, 40, 2020)

Publications associées (48)

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search

, ,

There has been a considerable interest in developing stiff, strong, tough, and highly stretchable hydrogels in various fields of science and technology including biomedical and sensing applications. However, simultaneous optimization of stiffness, strength ...

2021

, , ,

Porous brittle solids evidence complex mechanical behavior, where localized failure patterns originate from mechanical processes on the microstructural level. In order to investigate the failure mechanics of porous brittle solids, we outline a general stoc ...

2021

Surface modified microfibrillated cellulose‐poly(vinylidene fluoride) composites: β‐phase formation, viscoelastic and dielectric performance

Véronique Michaud, Yves Leterrier, Dragan Damjanovic, Mohammed Arif Poothanari

The effect of silylation of microfibrillated cellulose (MFC) surfaces on β‐phase formation in poly(vinylidene difluoride) (PVDF) and the resulting viscoelastic and dielectric performance of MFC‐PVDF composites is investigated. Two different organosilanes, ...

2021

, ,

Predicting the evolution of stiffness in cement paste requires linking morphological properties of the microstructure to the evolution of mechanical properties. Measures are typically difficult to obtain with sufficient time resolution to capture the trans ...

PERGAMON-ELSEVIER SCIENCE LTD2020

, ,

When designing unreinforced masonry buildings, the wall stiffness and, consequently, the masonry elastic and shear modulus E and G are essential parameters. Current codes provide empirical estimates of the masonry elastic modulus and a ratio between the sh ...

2020

This paper addresses the uniaxial tensile response of Strain Hardening Ultra High-Performance Fiber Reinforced Concretes (SH-UHPFRC) subjected to very low strain rates and low temperatures. The influence of four different strain rates; 1 × 10−5, 1 × 10−7, ...

2020

The tensile response of strain hardening UHPFRC under full restraint, subjected to curing temperatures of 20 °C, 10 °C, 5 °C, was investigated for two types of mixes with silica fume; Mix I with pure type I cement and Mix II with 50% replacement of cement ...

2020

A gravity-driven droplet will rapidly flow down an inclined substrate, resisted only by stresses inside the liquid. If the substrate is compliant, with an elastic modulus G < 100 kPa, the droplet will markedly slow as a consequence of viscoelastic braking. ...

2020

, , ,

The mechanical response of individual titanate nanowires (H2Ti3O7), synthesized in an upscaled production (kg/month) was investigated by means of an Atomic Force Microscope (AFM) in nanomechanical spectroscopic mode. Because of their layered structure, bes ...

2020

, , ,

In the seismic design of unreinforced masonry walls, the elastic modulus E and shear modulus G are essential parameters for the calculation of the in-plane wall stiffness. Current codes provide empirical estimates of the elastic modulus and furthermore a r ...

2019