FATIGUE EXAMINATION OF REINFORCED-CONCRETE BRIDGE SLABS USING ACOUSTIC EMISSION AND STRAIN MONITORING DATA
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Le projet de recherche Evaluation des systèmes existants pour le suivi à long terme des déformations des ponts a été initié dans le but de préparer sous forme condensée une présentation et une évaluation des systèmes de mesure existants pour le suivi à lon ...
This paper reports on the composite action developed between pultruded FRP bridge deck systems and the supporting main girders for road bridges. Presented are requirements that an FRP deck must satisfy in order to function as part of the upper chord of the ...
Up until today reinforced concrete has been used in most cases for the manufacturing of bridge decks. Depending on the quality of the work carried out, defects can already occur after only a few years. These defects mostly appear in the form of corrosion o ...
This paper describes the behavior of hybrid girders consisting of fiber-reinforced polymer (FRP) bridge decks adhesively connected to steel main girders. Two large-scale girders were experimentally investigated at the serviceability and ultimate limit stat ...
This paper describes the quasi-static and fatigue performance of hybrid bridge girders composed of cellular FRP bridge decks and steel girders. The FRP bridge deck is connected adhesively to the steel girders and acts as the top chord of the hybrid section ...
Punching of reinforced concrete and prestressed slabs is usually a critical failure mode for the design and verification of structures such as flat slabs or bridge slabs. Although codes of practice propose several rules for common cases (usually with an em ...
The deterioration of reinforced concrete structures and the associated rehabilitation work represent an economic cost of premier importance. In Switzerland, the structural maintenance expenditures amount to 40% to 65% of the initial construction cost (over ...
To improve the reduced available experimental data on the load capacity of full scale bridge deck slabs, 3 tests on a large scale bridge cantilever (10 x 4.2 m) were done. The cantilevers were tested under 4, 2 and 1 concentrated loads simulating traffic w ...
This paper presents the concept and the current state of a research investigating possibilities for further evolutions in medium span concrete road bridges. The main parameters of the study are the structural shape, the type of materials used and their dis ...
Proceedings of the 6th Int. PhD Symposium in Civil Engineering, Zurich 20062006
Due to their aesthetic and structural advantages, tubular space truss structures are enjoying increasing popularity in modern bridge construction. The use of cast steel nodes for the joints between the circular hollow section members is also becoming incre ...
