Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In this study, an experimental campaign was conducted to characterize the length effect on the elasticity and tensile strength of clear spruce wood parallel to the grain direction. Four groups of specimens of different lengths, cut from the same log, were ...
The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...
Atomistic simulations of bicrystal samples containing a grain boundary are used to examine the effect of hydrogen atoms on the nucleation of intergranular cracks in Ni. Specifically, the theoretical strength is obtained by rigid separation of the two cryst ...
Structural components used in civil engineering applications are often subjected to compressive loads. Unlike the tensile strength of fiber-reinforced polymer (FRP) materials, their compressive strength is resin-dominated, exhibiting lower values and more ...
Cellular metallic materials have emerged as a new promising class of materials due to their lightweight porous structures and advanced multi-functional properties. Originally limited to random metallic foams, modern lithography techniques have enabled the ...
The detrimental effects of the H on the mechanical properties of the metals are known for more than a century. One of the most important degradation mechanisms is H embrittlement (HE). In this thesis, we examined a few famous proposed mechanisms in the fie ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
Super-elastic Titanium based thin films Ti-23Nb-0.7Ta-2Zr-(O) (TNTZ-O) and Ti-24Nb-(N) (TN-N) (at.%) were deposited by direct current magnetron sputtering (DCMS) in different reactive atmospheres. The effects of oxygen doping (TNTZ-O) and/or nitrogen dopin ...
This study concerns the evolution of the thermomechanical properties of new high-performance materials. In particular, we focus on the relationship between the microstructure and the mechanical properties of a superalloy based on Co-Ni-Cr. Superalloys are ...
Various thermo-mechanical treatments were applied to refine and homogenise grain size and improve mechanical properties of hot-isostatically pressed (HIP) 14%Cr ODS ferritic steel. The grain size was reduced, improving mechanical properties, tensile streng ...
