Aqueous-phase reactive species formed by fine particulate matter from remote forests and polluted urban air

In the aqueous phase, fine particulate matter can form reactive species (RS) that influence the aging, properties, and health effects of atmospheric aerosols. In this study, we explore the RS yields of aerosol samples from a remote forest (Hyytiala, Finland) and polluted urban locations (Mainz, Germany; Beijing, China), and we relate the RS yields to different chemical constituents and reaction mechanisms. Ultra-high-resolution mass spectrometry was used to characterize organic aerosol composition, electron paramagnetic resonance (EPR) spectroscopy with a spin-trapping technique was applied to determine the concentrations of (OH)-O-center dot, O-2(center dot-), and carbon-or oxygen-centered organic radicals, and a fluorometric assay was used to quantify H2O2. The aqueous H2O2-forming potential per mass unit of ambient PM2.5 (particle diameter < 2.5 mu m) was roughly the same for all investigated samples, whereas the mass-specific yields of radicals were lower for sampling sites with higher concentrations of PM2.5. The abundances of water-soluble transition metals and aromatics in ambient PM2.5 were positively correlated with the relative fraction of (OH)-O-center dot and negatively correlated with the relative fraction of carbon-centered radicals. In contrast, highly oxygenated organic molecules (HOM) were positively correlated with the relative fraction of carbon-centered radicals and negatively correlated with the relative fraction of (OH)-O-center dot. Moreover, we found that the relative fractions of different types of radicals formed by ambient PM2.5 were comparable to surrogate mixtures comprising transition metal ions, organic hydroperoxide, H2O2, and humic or fulvic acids. The interplay of transition metal ions (e.g., iron and copper ions), highly oxidized organic molecules (e.g., hydroperoxides), and complexing or scavenging agents (e.g., humic or fulvic acids) leads to nonlinear concentration dependencies in aqueous-phase RS production. A strong dependence on chemical composition was also observed for the aqueous-phase radical yields of laboratory-generated secondary organic aerosols (SOA) from precursor mixtures of naphthalene and beta-pinene. Our findings show how the composition of PM2.5 can influence the amount and nature of aqueous-phase RS, which may explain differences in the chemical reactivity and health effects of particulate matter in clean and polluted air.

Long-range transport of pollution to Europe

Marion Auvray

Ozone (O3) and aerosols are harmful to human health. Long-range transport sources contribute to the background levels upon which local pollution builds. The goal of this thesis is to describe and quantify the respective contribution of local and long-range transported sources to the O3 and aerosol budget in the framework of European air quality management. This issue is examined using a global model of chemistry and transport, the GEOS-Chem model, constrained by several experimental datasets (e.g. trace gases and aerosol distributions, aerosol optical depth, particulate matter concentrations) taken from field experiments, ground-based sites and satellite. The capabilities of the model to reproduce O3 and aerosol patterns is first examined. The model reproduces well in general the distribution of O3 and related species over the North Atlantic/Europe area. The simulation of particulate matter smaller than 2.5 μm (PM2.5) and aerosol optical depth (AOD) over Europe is also satisfying in general, but this may reflect some compensating errors between individual components (e.g. underestimate of organic matter, and overestimate of sulphate and dust). Intercomparison between the GEOS-Chem and another global model (MOZECH) also reveals possible problems in the water vapour distribution associated with the processes which drive the vertical lifting of pollutant over continental boundary layers. Despite these (relative) deficiencies, the model provides anyway insights about the contribution of long-range transport on the O3 and aerosol loads over Europe. The impact of continental outflow on the O3 chemical tendencies over oceanic regions is quantified. Net O3 photochemical production in polluted air masses travelling over oceanic areas under the influence of continental outflow is enhanced all-year round compared to the background marine environment by 2 to 6 ppbv/day in the boundary layer and by 1 to 3 ppbv/day in the upper troposphere. The origin of O3 long-range sources and their impact on the European O3 budget, as well as the role of changing emissions on this budget over the pasts decades is further investigated. Import of North American O3 into Europe is mainly controlled by meteorological patterns and by photochemical production over the North Atlantic and thus reaches a maximum in summer. In addition, Asia contributes to long-range transported O3 pollution by the Indian summer monsoon easterly winds during summer. During the monsoon period, convection is strong and associated NOx lightning emissions also contribute to high O3 levels, especially in the Mediterranean basin. North American and Asian anthropogenic pollution contribute substantially to the annual O3 burden (integrated over the whole tropospheric column) over Europe, accounting for 11% and 8%, respectively while the European contribution only accounts for 9%. The increase in Asian emissions from 1980 to 1997 have compensated the local reduction of O3 precursors, especially in the free troposphere. Finally, the aerosol load over Europe and the contribution of long and medium-range sources including anthropogenic and biomass burning pollution from North America and mineral dust from North Africa is examined. The model was used to interpret MODIS (Moderate Resolution Imaging Spectroradiometer) AOD and observations provided by the International Consortium for Atmospheric Research on Transport and Transformation (ICARTT) campaign over the North Atlantic and European area. Trans-Atlantic transport of aerosol is controlled by meteorological patterns and scavenging processes and reaches a maximum in spring. North American uxes of aerosols reach Europe at flower altitudes than that of O3 because a larger fraction of aerosols are scavenged in the venting from the boundary layer by frontal passages and deep convection. During high vegetation fire events in the boreal forest of Alaska and Canada, biomass burning pollution could also reach Europe at high altitudes, because a fraction of fire emissions are emitted directly in the free troposphere. Finally, the Saharan region also contributes significantly to the aerosol load over Europe. European sources contribute by 58% and 48% to the surface PM2.5 and column AOD over Europe. The second main sources are the mineral dust which represent in average 20% of the surface PM2.5 and AOD. In summer, North American anthropogenic and biomass burning emissions represent between 2 to 5% of the surface PM2.5 and AOD. The PM2.5 daily standard levels of the World Health organization (WHO) (10 μg/m3) and of the U.S. Environmental Protection Agency (EPA) (65 μg/m3) are often exceeded during dust outbreaks, especially in southern Europe. Long-range transport of anthropogenic and natural pollution is thus an important issue which should be considered in the definition of air quality standards and regulation treaties.

EPFL2006

Aerosol Health Effects from Molecular to Global Scales

Andrea Mario Arangio, Gerhard Lammel

Poor air quality is globally the largest environmental health risk. Epidemiological studies have uncovered clear relationships of gaseous pollutants and particulate matter (PM) with adverse health outcomes, including mortality by cardiovascular and respiratory diseases. Studies of health impacts by aerosols are highly multidisciplinary with a broad range of scales in space and time. We assess recent advances and future challenges regarding aerosol effects on health from molecular to global scales through epidemiological studies, field measurements, health-related properties of PM, and multiphase interactions of oxidants and PM upon respiratory deposition. Global modeling combined with epidemiological exposure response functions indicates that ambient air pollution causes more than four million premature deaths per year. Epidemiological studies usually refer to PM mass concentrations, but some health effects may relate to specific constituents such as bioaerosols, polycyclic aromatic compounds, and transition metals. Various analytical techniques and cellular and molecular assays are applied to assess the redox activity of PM and the formation of reactive oxygen species. Multiphase chemical interactions of lung antioxidants with atmospheric pollutants are crucial to the mechanistic and molecular understanding of oxidative stress upon respiratory deposition. The role of distinct PM components in health impacts and mortality needs to be clarified by integrated research on various spatiotemporal scales for better evaluation and mitigation of aerosol effects on public health in the Anthropocene.

American Chemical Society2017

Observed coupling between air mass history, secondary growth of nucleation mode particles and aerosol pollution levels in Beijing

François Bianchi, Lubna Dada, Yu Fu, Jingjing Jiang

Atmospheric aerosols have significant effects on the climate and on human health. New particle formation (NPF) is globally an important source of aerosols but its relevance especially towards aerosol mass loadings in highly polluted regions is still controversial. In addition, uncertainties remain regarding the processes leading to severe pollution episodes, concerning e.g. the role of atmospheric transport. In this study, we utilize air mass history analysis in combination with different fields related to the intensity of anthropogenic emissions in order to calculate air mass exposure to anthropogenic emissions (AME) prior to their arrival at Beijing, China. The AME is used as a semi-quantitative metric for describing the effect of air mass history on the potential for aerosol formation. We show that NPF events occur in clean air masses, described by low AME. However, increasing AME seems to be required for substantial growth of nucleation mode (diameter < 30 nm) particles, originating either from NPF or direct emissions, into larger mass-relevant sizes. This finding assists in establishing and understanding the connection between small nucleation mode particles, secondary aerosol formation and the development of pollution episodes. We further use the AME, in combination with basic meteorological variables, for developing a simple and easy-to-apply regression model to predict aerosol volume and mass concentrations. Since the model directly only accounts for changes in meteorological conditions, it can also be used to estimate the influence of emission changes on pollution levels. We apply the developed model to briefly investigate the effects of the COVID-19 lockdown on PM2.5 concentrations in Beijing. While no clear influence directly attributable to the lockdown measures is found, the results are in line with other studies utilizing more widely applied approaches.