Partial discharge localization using time reversal: Application to gas insulated switchgear

Gas-insulated switchgear (GIS) are some of the most reliable and most expensive equipment that are nowadays used in power systems. Condition monitoring of the power system equipment can help operators detect defects like partial discharges (PDs) early, prevent severe damage to the insulation of the apparatus and the related costs. Different techniques such as time difference of arrival (TDoA) have already been implemented to localize PDs. The TDoA technique requires four synchronized sensors to find the 3D location, it does not yield accurate results in a realistic situation when having multiple PDs, noise, scattering or obstacles which mask the line of sight between the sensor(s) and the PD. To have a powerful and accurate technique that can localize single or multiple PDs in power transformers in the presence of noise, scattering, obstacles, etc., using a single sensor, the time reversal (TR) technique has recently been proposed in both the acoustic and electromagnetic regimes. In this paper, the electromagnetic time reversal (EMTR) technique is applied to localize PDs in GIS, which have a more complicated structure than a transformer. The performance of the method is demonstrated considering several realistic case studies involving two pipe-shape and T-shape parts of a GIS.

Partial Discharge Localization Using Time Reversal: Application to Power Transformers

Mohammad Azadifar, Hamidreza Karami, Amirhossein Mostajabi, Marcos Rubinstein

In this work, we present a novel technique to locate partial discharge (PD) sources based on the concept of time reversal. The localization of the PD sources is of interest for numerous applications, including the monitoring of power transformers, Gas Insulated Substations, electric motors, super capacitors, or any other device or system that can suffer from PDs. To the best of the authors’ knowledge, this is the first time that the concept of time reversal is applied to localize PD sources. Partial discharges emit both electromagnetic and acoustic waves. The proposed method can be used to localize PD sources using either electromagnetic or acoustic waves. As a proof of concept, we present only the results for the electromagnetic case. The proposed method consists of three general steps: (1) recording of the waves from the PD source(s) via proper sensor(s), (2) the time-reversal and back-propagation of the recorded signal(s) into the medium using numerical simulations, and (3) the localization of focal spots. We demonstrate that, unlike the conventional techniques based on the time difference of arrival, the proposed time reversal method can accurately localize PD sources using only one sensor. As a result, the proposed method is much more cost effective compared to existing techniques. The performance of the proposed method is tested considering practical scenarios in which none of the former developed methods can provide reasonable results. Moreover, the proposed method has the unique advantage of being able to locate multiple simultaneous PD sources and doing so with a single sensor. The efficiency of the method against the variation in the polarization of the PDs, their length, and against environmental noise is also investigated. Finally, the validity of the proposed procedure is tested against experimental observations.

2020

Partial Discharge Localization Using Electromagnetic Time Reversal: A Performance Analysis

Mohammad Azadifar, Ali Ghasemi, Hamidreza Karami, Marcos Rubinstein, Zhaoyang Wang

In this study, first, a comparison on the application of electromagnetic time reversal (EMTR) and time difference of arrival (TDoA) in partial discharge localization in power transformers is presented. A two-dimensional finite-difference time-domain simulation is used to calculate the signal recorded by the sensors. Results show that, in a transformer tank excluding its windings, both methods yield similar results in terms of location accuracy, although the EMTR method only needs one sensor to localize the partial discharge (PD) source while the TDoA method needs at least three sensors in the 2D localization problem. However, the presence of transformer windings leads to a degradation of the performance of the TDoA method if the line of sight from the source to the sensor is blocked by any of the winding blocks. On the other hand, the presence of the transformer windings has an effect on the localization of PD sources that occur between two adjacent phase windings when the distance between the outer winding distances is shorter than the minimum wavelength, λmin . The degradation is directly caused by the diffraction limit. It is shown that, if the distance between two adjacent phase windings is greater than λmin , the EMTR process can locate PD sources occurring between two adjacent phase windings with acceptable accuracy. A case of occurrence of PDs in close proximity (less than λmin /2) to a single metallic object is analyzed both numerically and experimentally. The analysis reveals that although a degradation in the accuracy of the localization is observed compared to the case of longer distances between the PD source and the metallic object, a reasonable localization error of 10 mm (corresponding to λmin /10) is obtained.

2020

Partial Discharge Localization Using Time Reversal: Application to Power Transformers

Mohammad Azadifar, Hamidreza Karami, Amirhossein Mostajabi, Marcos Rubinstein

2020