Publication
Contact Resistivity Measurements and their Applicability for Accurate Series Resistance Breakdown in Heterojunction Solar Cell
Publications associées (36)
Contact Design for Silicon Heterojunction Solar Cells
Today more than ever the world needs clean energy sources and thus a fast deployment and scaling up of the photovoltaic industry. In this context improving solar cell efficiency plays a major role. In order to achieve the maximum single junction efficiency ...
EPFL2022Dielectrophoretic Traps for Efficient Bead and Cell Trapping and Formation of Aggregates of Controlled Size and Composition
Philippe Renaud, Arnaud Bertsch, Clémentine Sophie Sarah Lipp
We present a microfluidic dielectrophoretic-actuated system designed to trap chosen single-cell and form controlled cell aggregates. A novel method is proposed to characterize the efficiency of the dielectrophoretic trapping, considering the flow speed but ...
2022Electrical Losses Mitigation in Silicon Heterojunction Solar Cells
To overcome the worldwide challenges of climate change, photovoltaics is foreseen to play a significant role in the world electricity production. Nowadays, single junction crystalline silicon (c-Si) based solar cells hold the largest share of the global ph ...
EPFL2021Temperature‐dependent performance of silicon heterojunction solar cells with transition‐metal‐oxide‐based selective contacts
Mathieu Gérard Boccard, Julie Amandine Dreon
The temperature coefficient (TC) is an essential figure of merit to accurately evaluate solar cell performance at various operating temperatures and hence enabling the comparison between different cell technologies. Recently, solar cells that use passivati ...
2021Influence of the Dopant Gas Precursor in P-Type Nanocrystalline Silicon Layers on the Performance of Front Junction Heterojunction Solar Cells
Christophe Ballif, Quentin Thomas Jeangros, Laurie-Lou Senaud, Mathieu Gérard Boccard, Jan Haschke, Luca Massimiliano Antognini, Jean Cattin, Julie Amandine Dreon, Mario Joe Lehmann, Vincent Philippe Paratte
Silicon heterojunction solar cells can employ p-type hydrogenated nanocrystalline silicon nc-Si:H(p) on their front side, since these can provide better transparency and contact resistance compared to hydrogenated p-type amorphous silicon layers. We invest ...
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021Lateral transport in silicon solar cells
Christophe Ballif, Gabriel Christmann, Mathieu Gérard Boccard, Jan Haschke
We investigate lateral charge carrier transport in crystalline silicon solar cells. Under typical operation illumination of high-efficiency solar cells, a significant population of electrons and holes exist in the silicon wafer, leading to a non-negligible ...
AIP2020Optimized Module Packaging for Silicon Heterojunction Solar Cells and Increased PID Resistance
Recent studies showed that silicon heterojunction (SHJ) solar cells can be prone to potential induced degradation (PID) when encapsulated with a low volume resistivity ethylene vinyl acetate (EVA). We perform PID test in humid conditions (85°C/85% RH) on g ...
EU PVSEC Proceedings2020Optimization of front SiNx/ITO stacks for high-efficiency two-side contacted c-Si solar cells with co-annealed front and rear passivating contacts
Christophe Ballif, Franz-Josef Haug, Xavier Niquille, Andrea Ingenito, Sylvain Nicolay, Frank Meyer
In this contribution, we present an electron selective passivating contact metallised with a low temperature process to target front side applications in crystalline silicon (c-Si) solar cells. In addition to an interfacial silicon oxide (SiOx) and an in-s ...
2020Contact Resistivity of the p-Type Amorphous Silicon Hole Contact in Silicon Heterojunction Solar Cells
In silicon heterojunction solar cells made with high-lifetime wafers, resistive losses in the contacts dominate the total electrical power loss. Moreover, it is widely believed that the hole contact stack—a-Si:H(i)/a-Si:H(p)/ITO/Ag—is responsible for more ...
2019Passivation, conductivity, and selectivity in solar cell contacts: Concepts and simulations based on a unified partial-resistances framework
Passivation, conductivity, and selectivity are often acknowledged as the three requirements for optimal contacts to photovoltaic solar cells. Although there are generally accepted definitions and metrics for passivation and conductivity, a common understan ...
2019