EFFICIENT COOLING SYSTEM FOR SUPERCONDUCTING GANTRY MAGNET
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Improving the energy efficiency of cooling systems can contribute to reduce the emission of greenhouse gases. Currently, most microelectronic applications are air-cooled. Switching to two-phase cooling systems would decrease power consumption and allow for ...
The operation of the Large Hadron Collider calls for a thorough analysis of the thermo-electric behavior of the 13 kA superconducting bus-bars connecting its dipole and quadrupole main magnets. This presentation reports a synthesis of the work performed jo ...
Increasing economic development, and growing population, generated during the last decades a very important growth of cities. Urban regions include nowadays more than half of the global population and, by 2030, this proportion is forecasted to increase to ...
The next generation of superconducting magnets for the interaction regions of particle colliders, as well as for fast cycled accelerators, will be confronted with large heat loads. In order to improve the evacuation of heat from the Nb-Ti coil towards He-I ...
The Superconducting Fault Current Limiter (SFCL) appears to be a device of great interest to efficiently build the electrical grid of tomorrow. With the recent progress made by the superconducting wires manufacturers, there are needs coming from the indust ...
Superconducting magnets submitted to large heat loads, as the low-β quadrupoles for the LHC luminosity upgrade, need the development of new concepts of cable electrical insulation featuring a He-II porous wrapping scheme. This paper reports and discusses r ...
Using a three-current model (i.e. heat, spin-up and spin-down electrons) the thermodynamics of irreversible processes predicts that a temperature gradient gives rise to a spin current on large scales, in particular under the conditions used to measure the ...
Power Electronic components require cooling to limit junction temperatures to ensure long and reliable operation. Heat sinks are used for cooling the components. In applications which entail operation at altitudes, derating factors are provided by manufact ...
Reduction of the specific fuel consumption of gas turbines can be achieved by maximizing the turbine inlet temperature. However, this requires a detailed understanding of the cooling performance in order to ensure safe and economical operation of the engin ...
The paper presents an application of the transient heater foil measurement technique using thermochromic liquid crystals (TLC) to endwall heat transfer and film cooling investigations in a transonic turbine vane cascade. The film cooling configuration cons ...
American Soc Mechanical Engineers, Three Park Avenue, New York, Ny 10016-5990 Usa2008
