Constructional method of UHPC on steel deck of long span suspension bridge and in-situ experimental test
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Direct load transmission experiments on hybrid short-span beam specimens for a novel bridge deck were performed. The sandwich construction consists of three layers: a fiber- reinforced polymer composite (FRP) sheet with T-upstands for the bottom skin, ligh ...
In the design of tubular truss bridges, engineers have found the fatigue performance of the joints to be a critical aspect. In looking for ways to improve this performance, the use of residual stress-based post-weld treatments has been suggested. Although ...
Reinforced concrete bridge deck slabs without shear reinforcement can be subjected to concentrated or distributed loads of important magnitude. Under these loads their structural response is not always ductile. In particular under concentrated loads their ...
So-called “non-load bearing” parts of (railway) bridges increase the stiffness and decrease the stresses in short span bridge structures. The rail track, consisting of ballast, sleepers and rails, has a non-linear behaviour and its rigidity depends on the ...
Herein, a probabilistic model for predicting the effect of post-weld treatment on the fatigue performance of the welded joints in tubular truss bridges is described. Specifically, a probabilistic LEFM-based model is first developed for the fatigue analysis ...
The in-plane tensile performance of a pultruded FRP bridge deck system was examined with regard to the use of the deck as the compositely acting top chord of hybrid bridge main girders in negative moment regions. The deck properties determined on the syste ...
2006
,
This paper reports on the composite action developed between pultruded FRP bridge deck systems and the supporting main girders for road bridges. Presented are requirements that an FRP deck must satisfy in order to function as part of the upper chord of the ...
Up until today reinforced concrete has been used in most cases for the manufacturing of bridge decks. Depending on the quality of the work carried out, defects can already occur after only a few years. These defects mostly appear in the form of corrosion o ...
Due to their aesthetic and structural advantages, tubular space truss structures are enjoying increasing popularity in modern bridge construction. The use of cast steel nodes for the joints between the circular hollow section members is also becoming incre ...
At early age, ultra high performance fibre reinforced concretes (UHPFRC)undergo significant volumes changes (thermal deformation and autogenous shrinkage)related to their composition. These deformations can be restrained by different elements respective to ...
