Transforming Phosphogypsum Waste into Products with Market Value
Publications associées (47)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Mortars prepared with a CEM I and a CEM III/B binder were investigated in different magnesium sulfate solutions. The main deterioration mechanism for the CEM I was expansion, while surface erosion was dominant for CEM III/B. The presence of sodium, potassi ...
We studied the interdependent effects of phosphate, silicate and Ca on the formation of Fe(III)-precipitates by oxidation of 0.5 mM Fe(II) in near-neutral bicarbonate-buffered aqueous solutions at concentrations relevant for natural water resources. Comple ...
Calcium silicate hydrate (C-S-H) was synthetized at 20 degrees C to investigate the effect of aluminium uptake (Al/Si = 0-0.33) in the presence and absence of alkalis on the composition and the solubility of a C-S-H with a Ca/Si equal to 1.0. C-S-H incorpo ...
Calcium silicate hydrate (C-S-H) is the main hydrate phase in Portland cements. Its composition
varies depending on the Ca/Si ratio and on the presence of other ions such as aluminium (called CA-
S-H) or alkalis.
This thesis aimed to study the compositi ...
This Master thesis comes within the framework of the PURR project (Partnership for Urban Resource Recovery), which is a collaboration between the Department of Water and Sanitation in Developing Countries (Sandec) at the Swiss Federal Institute of Aquatic ...
The development of microreactors that operate under harsh conditions is always of great interest for many applications. Here we present a microfabrication process based on low-temperature co-fired ceramic (LTCC) technology for producing microreactors which ...
If nanotechnology proves to be successful for bulk applications, large quantities of nanocomposites are likely to end up in municipal solid waste incineration (MSWI) plants. Various studies indicate that nanoobjects might be harmful to human health and the ...
Calcium-containing slag material is produced in iron- and steelmaking worldwide, including Finland. One process route utilizing this calcium, being developed towards large-scale application, is the so-called slag2pcc concept. Using ammonium salts, up to 50 ...
Villigen PSI, World Resources Forum, printed by Paul Scherrer Institute2015
Acidification of airborne dust particles can dramatically increase the amount of bioavailable phosphorus (P) deposited on the surface ocean. Experiments were conducted to simulate atmospheric processes and determine the dissolution behavior of P compounds ...
The volume and composition of Ukraine’s municipal solid waste (MSW) has changed in recent years. The percentage of paper and plastics has increased considerably; consequently, manual separation of these materials from landfills has become necessary. In 201 ...