Approche expérimentale du comportement mécanique des polymères en sollicitation rapide
Publications associées (143)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The main goal of this paper is to shed light on the effect of strain rate and viscoplastic deformation of bulk solder on the interfacial failure of lead-free solder joints. For this purpose, interfacial damage evolution and mode I fracture behavior of the ...
We investigate the dynamic behavior of concrete in relation to its composition within a computational framework (FEM). Concrete is modeled using a meso-mechanical approach in which aggregates and mortar are represented explicitly. Both continuum phases are ...
For environmental reasons, lead has been banned from microelectronic solder materials since the adoption of the RoHS legislation in 2006. A large number of investigations have lead to the development of new lead-free solder materials like the SnAgCu alloy ...
A split Hopkinson pressure bar system with a special shape striker has been suggested as the test method by the International Society for Rock Mechanics (ISRM) to determine the dynamic characteristics of rock materials. In order to further verify this test ...
The edge strength of glass is affected by the load history. To quantify this effect, 12 series of glass specimens were subjected to either linearly increased (reference value), constant or cyclic loading. For constant loading the experimental values could ...
On application of heat, shape memory polymers (SMPs) are able to revert to a primary shape from a secondary shape induced by mechanical deformation. It may be desirable to induce shape recovery at controlled rates under quasi-isothermal conditions, e. g. i ...
Spie-Int Soc Optical Engineering, Po Box 10, Bellingham, Wa 98227-0010 Usa2012
Embrittlement by helium was investigated in a lamellar TiAl alloy under two conditions: Specimens were implanted to various amounts of helium up to 762 appm at temperatures from 630 °C to 1000 °C and some of them subsequently creep-tested at the same tempe ...
The thermomechanical recovery behavior of a commercial cold-curing structural epoxy adhesive was investigated. Exposing the adhesive to temperatures above the glass transition temperature T-g significantly increased the latter although the curing degree in ...
Tantalum and hafnium carbides are classified as Ultra High Temperature Ceramics (UHTC) because of their extreme melting temperatures (above 3900 degrees C). Therefore, these materials can safely operate in the range of temperature that any other materials ...
The aim of this thesis has been to investigate the use of heat-activated shape memory polymers (SMPs) as novel smart actuators for the controlled delivery of fluids and their suitability for applications such as low-cost drug delivery. On heating to temper ...