Construction material monitoring with "optical hair" hygrometers

Moisture is an essential parameter in the behaviour of capillary-porous construction materials such as timber and concrete. It affects liquid and gas transport phenomena, chemical and biological degradation processes, mechanical properties and, in the case of concrete, hydration. From a scientific point of view, moisture monitoring is essential in order to improve the understanding of material behaviour. Moisture measurements may increase the predictive accuracy of established material behaviour models. In practice, the increased knowledge of material behaviour improves structural maintenance planning. The main objective of this work is to propose a measurement method for non-destructive, in-depth moisture monitoring of construction materials. In this context, an intrinsic point and an averaging fibre optic relative humidity sensor have been developed and tested. The sensors are based on optical fibres that are coated with a hygroscopically swelling transducer polymer. When wet, the swelling of the coating strains the fibre (analogy with the hair hygrometer). The induced strain is assessed with conventional fibre optic strain sensing techniques such as fibre Bragg gratings and Michelson interferometry. Theoretical and experimental studies lead to a detailed understanding of the influence of humidity and temperature on the steady and transient state sensor behaviour. The sensors have an accurate, linear, reversible and reproducible response to relative humidity between 5 and 95 %RH and between 13 and 60 °C, at least. The sensor response time is in the order of 20 minutes. However, when packaged, the sensor responds slower. The temperature cross-sensitivity of the fibre Bragg grating sensor may be compensated with an additional non-hygroscopic grating, while the Michelson interferometric sensor provides an auto-compensation of temperature effects. Tests in mortar and timber samples demonstrate that the sensors preserve their sensing ability when embedded. These tests have also clarified the multiplexing potential of fibre Bragg gratings for forming a multi-point RH sensor. Multi-point sensors are particularly useful for profile measurements.

Enhanced Signal-Associated Noise in a φ-OTDR System

Malak Mohamed Hossameldeen Omar Mohamed Galal, Suneetha Sebastian, Luc Thévenaz

Owing to their high sensitivity with respect to external measurands, Rayleigh-based distributed optical fiber sensors (DOFS) find their way into applications in many industrial and academic sectors. To further transcend the limit of these sensors in terms of sensing range, low spatial resolution, speed and accuracy of the measurement, improving the signal-to-noise ratio (SNR) of the system plays a pivotal role. Out of the several existing techniques for enhancing the SNR, one such method, solely dedicated to the Rayleigh-based sensors, is through intrinsically increasing the backreflected signal of the fibers. The enhanced backreflected signal provided by such fibers, generally known as reflection-enhanced fibers (REF), is rigorously analyzed in the present work. It is inferred from the analysis that the enhanced signal is essentially accompanied by enhanced signal-dependent noises, which can adversely affect their performance. For instance, when a performance comparison is carried out between the REF and a standard single-mode fiber (SMF) under identical experimental conditions, due to their different intrinsic backreflected signal levels, the two fibers experience dissimilar noise regimes leading to an erroneous estimation of the performance of the former. This necessitates the optimization of the interrogation system and the experimental parameters while employing such fibers for specific sensing applications. Additionally, a distributed temperature measurement is presented by taking advantage of the enhanced SNR of a 100 m long REF exhibiting a sub-mK temperature uncertainty of 0.5 mK at metric spatial resolution yielding a sixfold improvement compared to the 3 mK uncertainty of an SMF.

2022

Extreme temperature sensing using Brillouin scattering in optical fibers

Alexandre Fellay

Stimulated Brillouin scattering in silica-based optical fibers may be considered from two different and complementary standpoints. For a physicist, this interaction of light and pressure wave in a material, or equivalently in quantum theory terms between photons and phonons, gives some glimpses of the atomic structure of the solid and of its vibration modes. For an applied engineer, the same phenomenon may be put to good use as a sensing mechanism for distributed measurements, thanks to the dependence of the scattered light on external parameters such as the temperature, the pressure or the strain applied to the fiber. As far as temperature measurements are concerned, Brillouin-based distributed sensors have progressively gained wide recognition as efficient systems, even if their rather high cost still restricts the number of their applications. Yet they are generally used in a relatively narrow temperature range around the usual ambient temperature; in this domain, the frequency of the scattered light increases linearly with the increase in temperature. The extension of this range toward higher (up to 800°C) and lower (down to 1 K) temperature is the main aim of this thesis. In both cases, our measurements on various fiber samples show that the aforementioned linearity does not hold. Most notably, the characteristics of Brillouin scattering at low and very low temperature are strikingly different from those observed under normal conditions; they are directly related to the disordered nature of the silica that constitutes the fiber, what motivates the large place we here devote to the physics of amorphous solids. Despite the observed nonlinearities, our results demonstrate the feasibility of thermometry based on Brillouin scattering over the full investigated temperature range. We can thus swap in the last part of this work the physicist's point of view for that of an engineer and present the setup and the performances of a sensor, or rather of a whole family of sensors we have tested and improved in the course of the last few years; moreover, some real measurement examples are given. Finally, we propose some possibilities of further enhancement, that remain right now at the preliminary stage of their development.

EPFL2003

An optical fibre sensor for dynamic deformation measurements based on the intensity modulation of a low-coherence source

Daniele Inaudi, Pramod Rastogi, Luc Thévenaz

An optical fibre sensing technique for the measurement of dynamic deformations using a Michelson interferometer is reported. The method applied to interferometers with an initial path unbalance of around 1 cm is based on the rf intensity modulation of a low-coherence source. A large measurement range of 1 cm is intrinsic to the method and with an adequate demodulation process sensitivity better than 10 μm is obtained. This novel approach allows for measuring dynamic deformations with a bandwidth up to 100 Hz.

Taylor & Francis2003

Extreme temperature sensing using Brillouin scattering in optical fibers

Alexandre Fellay

EPFL2003