Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Using a simple beam element, this study estimates the elastic stiffness of two isotropic open-cell foam architectures that approximate, respectively, the space between tightly packed fluid bubbles and that defined between densified solid particles, and fin ...
The influence of carbon nanotubes (CNTs) and graphene nanoplatelets (GnPs) on the structure and mechanical properties of polyamide 12 (PA12) fibers was investigated. As seen from wide-angle X-ray diffraction analysis the crystallinity index increases with ...
Materials with controllable stiffness are of great interest to many fields, including medicine and robotics. In this paper we develop a new type of variable stiffness material based on the combination of a rigid low-melting-point-alloy (LMPA) microstructur ...
Large-scale shake table tests were conducted at E-Defense, Japan, to examine the dynamic response of a steel concentrically braced frame. The specimen was a single-bay, single-story frame with a pair of square hollow structural section braces placed in a c ...
The purpose of this project is to perform topology optimization on the cantilever beam problem, which is a particular case of the two-dimensional elasticity problem. Based on a finite element discretization, a Matlab implementation of the elasticity proble ...
We report on the increase of the Young's modulus (E) of chemical vapor deposition (CVD) grown multi-walled carbon nanotubes (MWNTs) upon high temperature heat treatment. The post heat-treatment at 2200-2800 degrees C in a controlled atmosphere results in a ...
A method for preparing a topographically structured hydrogel microarray is described comprising the steps of a) providing one or more types of biomolecule(s) on top of micropillars of an array of micropillars, preferably by means of robotical spotting, b) ...
Auxetic materials expand when stretched, and shrink when compressed. This is the result of a negative Poisson's ratio ν. Isotropic configurations with ν≈−1 have been designed and are expected to provide increased shear stiffness G. This assumes that Young' ...
Irradiated austenitic stainless steels, because of their low stacking fault energy and high shear modulus, should exhibit a high ratio of stacking fault tetrahedra relative to the overall population of radiation induced nanometric defects. Experimental obs ...
Contact less electrostatic force microscopy (EFM) and dielectric force microscopy (DFM) are demonstrated to be very powerful tools of characterizing the electronic properties of individual single-walled carbon nanotubes (SWCNTs). Taking the advantages of t ...
