Propriétés magnétiques de nanostructures de cobalt adsorbées

This thesis reports results on magnetic properties of supported cobalt nanostructures. The nanostructures were grown on single crystal metal surface by Molecular Beam Epitaxy in an Ultra High Vacuum chamber. Our experimental setup is based on two in situ measurement techniques. The first is the Scanning Tunneling Microscope (STM) allowing to investigate the nanostructure morphology. The second, called Surface Magneto-Optical Kerr Effect (SMOKE), probes the magnetism of the nanostructures. By combining the data obtained with both techniques we were able to investigate the magnetism of 2D nanoparticles down to the atomic level. The first aim of the thesis consisted in disclosing the role played by the differently coordinated atoms in determining the Magnetic Energy Anisotropy in 2D nanostructures. To this purpose, we performed experiments on the Co/Pt(111) system, chosen as a model system since the Pt surface is well known to increase the out-of-plane uniaxial anisotropy as well as the magnetic moment of the Co islands. A preliminary work has been devoted to the growth of the Co islands as a function of the deposition and annealing temperatures. As a result, we learned to grow three different island's shapes : ramified, compact and double-layer islands. We then concentrated on the magnetism of these islands. Due to the nonlinear relationship between perimeter length and surface area, we were able to distinguish the different contributions to the anisotropy energy of surface and perimeter atoms. We found that the magnetic anisotropy in 2D Co nanostructures is predominantly due to the low-coordinated edge atoms, for which the anisotropy energy can be as large as 20 times the bulk value. This finding opens new possibilities to separately tune the anisotropy and moment of nanostructures. To exemplify this, and to illustrate once more the role of perimeter atoms, we produced Co island with a non-magnetic Pt core. As expected, these bimetallic islands have identical anisotropy and lower magnetic moment to their equally shaped pure Co counterpart. The second aim we focused on was the investigation of the magnetic properties of ultra-high density arrays of nanostructures created by self-assembly. We chose Co/Au(788) as a model system since the nanoscopic Co dots were found to have a very narrow size distribution and to be placed onto a lattice which is phase coherent on a macroscopic length scale. Moreover, the array has a density of 26 Tdot/in2 which allows the investigation of inter-particle interaction in ultra high density arrays. We showed that the narrow size distribution of the dots corresponds to an unprecedented narrow Magnetic Anisotropy Energy distribution with 35% width at half of the maximum. Moreover, we demonstrated the weak magnetic coupling between the Co dots despite their high density. In parallel to these fundamental researches, we developed a new experimental setup that will replace the current one. We designed a UHV chamber equipped with a homemade variable temperature STM combined with a SMOKE experiment. A quadrupole, focused on the sample, generates a 0.35 T magnetic field. This field is one order of magnitude larger than the present one and can be uniformly rotated in the plane of the quadrupole. Furthermore, the design of the new chamber allows STM imaging in this magnetic field. In this report, we present the adopted solutions as well as the first tests of the components (STM, SMOKE, cryostat).

Submonolayer growth of cobalt on metallic and insulating surfaces studied by scanning tunneling microscopy and kinetic Monte-Carlo simulations

Philipp Buluschek

Submonolayer epitaxial growth is obtained by the deposition of less than a complete layer of atoms on a single crystal surface. It is of fundamental interest for industrial applications (e.g. in the semiconductor industry) as well as from the point of view of basic research. For example, it is known that nanometer-sized atomic structures (nanostructures) exhibit remarkable physical and chemical properties which can differ greatly from those of bulk matter. In order to investigate these properties, it is often necessary to create large quantities of well defined and possibly spatially ordered nanostructures. One way to achieve this result is self-organized growth where one deposits atoms on a clean crystalline surface and lets the growth process evolve freely. Here, nanostructures result from the atomic diffusion and aggregation processes taking place at the surface. Understanding the exact nature of these processes is of ongoing interest in the field of nanostructure growth. In this thesis we report about submonolayer growth experiments of the ferromagnetic transition metal cobalt. Cobalt was chosen because it exhibits remarkable magnetic properties. These experiments were performed in an ultra-high vacuum chamber and molecular beam epitaxy was used to grow the nanostructures. Observations of the surface were made using a variable-temperature scanning tunneling microscope (STM). In order to get a better understanding of the atomic processes happening at the surface, we developed two adapted computational simulation methods. Kinetic Monte-Carlo (KMC) simulations were used to get an atomistic picture of the surface while mean field rate equations were integrated numerically to yield cluster densities. We study the growth of cobalt on three different surfaces. By depositing Co on a clean Pt(111) crystal surface, we observe that the platinum surface reconstructs by forming star-shaped partial dislocations for sample temperatures above 180 K (-93°C). We also observe that island densities deviate from predictions of all known models towards higher values for these same temperatures. By simulation we are able to show that insertion of Co into the topmost platinum layer creates a repulsive network of dislocations. We show that these dislocations act as diffusion inhibiting barriers and thus influence the island density by constraining the free movement of atoms at the surface. We also show that the Co dimer and trimer diffuse on Pt(111) before dissociating and are able to extract corresponding activation barriers. We also study the deposition of Co on a Ru(0001) surface which shows a more conventional temperature dependence. By comparing simulation and experiment we extract all relevant diffusion activation barriers and show that at high temperatures the Co dimer and trimer dissociate. Finally, we investigate the growth of Co on the hexagonal boron nitride superlattice which forms on a Rh(111) surface. On this surface Co clusters form three-dimensional hemispherical dots. We show how the substrate corrugation influences diffusion of Co atoms and that clusters up to the size of the pentamer can diffuse. By simulation, we also extract the relevant migrations and desorption barriers.

EPFL2008

Magnetic anisotropy from single atoms to large monodomain islands of Co/]Pt(111)

Harald Brune, Pietro Gambardella, Stefano Rusponi, Nicolas Weiss

By studying the magnetic behavior of self-assembled Co islands on a single-crystal metal surface, Pt(111), we show how the magnetic anisotropy evolves from isolated atoms to monolayer islands and films. Single Co adatoms are found to have a giant magnetocrystalline anisotropy energy of E-a = 9.3 +/- 1.6 meV/atom arising from the combination of partly preserved orbital moments (m(L) = 1.1 mu(B)) and strong spin-orbit coupling induced by the Pt substrate. Combined scanning tunneling microscopy and X-ray magnetic circular dichroism experiments performed for differently sized small two-dimensional Co islands establish a clear connection between E-a and m(L), both quantities decrease sharply with the lateral coordination of the magnetic atoms. In accordance with this, Kerr magnetometry experiments, again performed in conjunction with scanning tunneling microscopy, reveal that the anisotropy energy of large two-dimensional Co islands is almost entirely determined by the relatively low number of perimeter atoms, having E-a = 0.9 +/- 0.1 meV/atom. These results confirm theoretical predictions and are of fundamental value the understanding of how the magnetic anisotropy develops in finite-size magnetic particles. Identification of the role of perimeter and surface atoms opens up new opportunities for engineering the anisotropy and the moment of a magnetic nanostructure. (C) 2004 Academie des sciences. Published by Elsevier SAS. All rights reserved.

2005

Magnetism of Single Adatoms and Small Adsorbed Clusters Investigated by Means of Low-Temperature STM

Quentin Dubout

This thesis works reports on the magnetic properties of single transition metal atoms and hydrogenated compounds adsorbed on crystal surfaces. It is an experimental study, based on scanning tunneling microscopy (STM), initiated by the project of demonstrating the existence of magnetic remanence for single adsorbed atoms (adatoms). All the measurements have been performed with a scanning tunneling microscope operating at 0.4 K and equipped with 8.5 T superconducting coils. The investigated systems are cobalt atoms, pure and hydrogenated (cobalt hydrides), adsorbed on Pt(111) and graphene on Pt(111) surfaces. In the first case, we have immediately been confronted to the presence of cobalt hydrides on the surface. Three types of hydrides (CoH, CoH2, and CoH3) have been identified, quite different from the clean adatoms, and readily distinguished by their tunnel spectrum (STS). Twoofthesehydridesdisplaylow-energyvibrationalmodes(1−30meV),identifiedbytheir absence of response to a magnetic field, the effect of an isotopic substitution, and by comparison with known systems. The three hydrides can be deprotonated applying a sufficient voltage between tip and sample. CoH2 on Pt(111) presents a Kondo resonance, due to a half-integer spin (S = 3/2) and a peculiar magnetic anisotropy. This system corresponds to the first demonstration of the appearance of the Kondo effect upon hydrogen adsorption. The results of several attempts to observe remanence for single cobalt adatoms on Pt(111) with spin-polarized scanning tunneling microscopy (SP-STM) are also presented and discussed. The second system differs from the first one in the presence of a graphene layer on the Pt surface. The first experimental determination of the magnetic moment and magnetic anisotropy of adatoms on graphene is reported in this thesis. A magnetic moment of (2.2 ± 0.4) μB was measured by spin-excitation spectroscopy (SES), as well as a hard magnetization axis with an anisotropy energy of 8.1 ± 0.4 meV. This value, comparable to the record value of single cobalt atoms on Pt(111), has been mainly attributed to the strong hybridization between cobalt and graphene. Ab initio calculations confirmed our observations. Graphene thus represents an extremely promising substrate for future applications in nanoscale magnetism and spintronics. This system also exhibits three different cobalt hydrides in addition to the clean atoms. Their respective chemical composition, CoH, CoH2, and CoH3, was determined by direct comparison between high resolution STM images and simulated images obtained from ab initio calculated atomic structures. A controlled deprotonation method is presented. CoH3 is the only hydride to display spin excitations. Its magnetic moment is comparable to that of clean cobalt, it presents a hard magnetization axis as well, however, its magnetic anisotropy energy is sensibly lower, 1.7 ± 0.05 meV. The other two hydrides display vibrational excitations only. The effect of hydrogen on the magnetic properties of metal adatoms is therefore very strong in this system as well, and must be taken into account in future studies, hydrogen being a very common contaminant in ultra-high vacuum set-ups. Finally, a detailed study of the structure graphene mono- and bilayers on Ru(0001) was realized. Two different stackings, AB and AA, have been identified for the bilayers, the last one not observed to date for this system. The moiré structure of monolayer graphene and of this last type of bilayer has been determined: (11.57×11.57)R4.3◦ and (10.54×10.54)R4.7◦, respectively. Moreover, C-C bond distortions of more than 10%, observed in the STM images, have been studied in detail. A quantitative comparison with ab initio calculations allowed to identify their origin as the tilt of the graphene π-orbitals. These distortions are therefore purely artificial. This is an important result for future scanning tunneling microscopy studies of graphene.