Strengthening mechanisms and thermal stability of arc deposited nanostructured TiAlN-based thin films
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A large portion of reinforced concrete (RC) bridges in the western world were built in the second half of the last century. RC bridge deck slabs are nowadays often subjected to increased traffic loading and volume than originally designed for and thus, ste ...
Until now, only two intrinsically two-dimensional materials have been isolated: graphene and boron nitride (BN). As a consequence, the knowledge of two-dimensional systems is still limited and other classes of two-dimensional materials are needed to enrich ...
In this work, the effects of vanadium addition in the range of 0.3-3% (in weight percent) for an oxide dispersion strengthened reduced activation ferritic (ODS RAF) steel were investigated. Samples of the V-modified steel have been prepared using elemental ...
In the quest of the structural materials for the future fusion reactor, it has been shown that ferritic/martensitic (F/M) steels are very promising candidates, with a good radiation resistance in terms of damage accumulation in the microstructure relative ...
The influence of the quench rate after solution treatment on the bendability of AA6016 aluminum alloy sheets was investigated. Crack initiation during bending tests is found to be independent of quench rate whereas crack propagation is decreased after rapi ...
Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...
Titanium alloys manifest low thermal conductivity and high work hardenability in machining. These alloys are thus considered as difficult-to-machine at higher cutting speeds and pose serious problems in machining such as degraded machined surface and rapid ...
The rational synthesis of novel materials requires the control over the arrangement of matter in order to meet the desired properties for applications and devices. Ultimately, control means to define the place of each atom and determine its chemical state, ...
An in situ annealing stage has been developed in-house and integrated in the chamber of a Scanning Electron Microscope equipped with an Electron BackScattered Diffraction system. Based on the Joule effect, this device can reach the temperature of 1200°C at ...
This work presents a study of XRD measurements on the development of the (113) preferential orientation with film thickness for Ti0.67Al0.33N films grown on Si(100) substrates by pulsed DC magnetron sputtering. The buildup of (113) texture was observed usi ...
