Recherche

Afficher tous les résultats pour

Accueil

Publication

A Ball-Screw Driven Motorized Hip Orthosis

Publications associées (21)

Page 1 sur 3

À propos
Confidentialité
Mentions légales

Graph Chatbot

State-Based Versus Time-Based Estimation of the Gait Phase for Hip Exoskeletons in Steady and Transient Walking

Auke Ijspeert, Mohamed Bouri, Ali Reza Manzoori, Tian Ye

The growing demand for online gait phase (GP) estimation, driven by advancements in exoskeletons and prostheses, has prompted numerous approaches in the literature. Some approaches explicitly use time, while others rely on state variables to estimate the G ...

IEEE2023

Magnetization-prepared 2 Rapid Gradient-Echo MRI for B-1 Insensitive 3D T1 Mapping of Hip Cartilage: An Experimental and Clinical Validation

Tobias Kober

Background: Often used for T1 mapping of hip cartilage, three-dimensional (3D) dual-flip-angle (DFA) techniques are highly sensitive to flip angle variations related to B-1 inhomogeneities. The authors hypothesized that 3D magnetization-prepared 2 rapid gr ...

RADIOLOGICAL SOC NORTH AMERICA2021

Advantages of patient-specific cutting guides with disposable instrumentation in total knee arthroplasty: a case control study

Brigitte Jolles-Haeberli

BackgroundTotal knee arthroplasty (TKA) is most frequently planned using conventional two-dimensional weight-bearing lower limb radiographs and is performed with conventional femoral and tibial cutting guides. Questions have been raised about the accuracy ...

BMC2021

High-frequency broadband laser phase noise cancellation using a delay line

Timo Zwettler

Laser phase noise remains a limiting factor in many experimental settings, including metrology, time-keeping, as well as quantum optics. Hitherto this issue was addressed at low frequencies ranging from well below 1 Hz to maximally 100 kHz. However, a wide ...

2021

A Vibrational Technique for in vitro Intraoperative Prosthesis Fixation Monitoring

Kamiar Aminian, Hooman Dejnabadi, Seyed Abdolmajid Yousefsani

Objective: In this paper, a new vibrational modal analysis technique was developed for intraoperative cementless prosthesis fixation evaluation upon hammering. Methods: An artificial bone (Sawbones)-prosthesis system was excited by sweeping of a sine signa ...

2020

Control Strategies for Lower-limb Exoskeletons: from Full Mobilization to Assistance of Balance

Romain Pierre François Baud

Bipedal locomotion is a remarkable feature of humans. This skill is necessary for the activities of daily living. Unfortunately, many people only partially benefit from it or miss it entirely because of a disability. This may result in a slower gait, less ...

EPFL2020

Wide band-pass FSS with reduced periodicity for energy efficient windows at higher frequencies

Josef Andreas Schuler, Luc Burnier, Jérémy Jacques Antonin Fleury

A simulation model and an experimental characterization of energy saving glazing transparent to mobile communication frequency up to 40 GHz is presented. A previous study showed that laser structured energy efficient windows with a frequency selective surf ...

SPRINGER HEIDELBERG2020

Evaluation of time-frequency features as detectors of lack of balance due to tripping-like perturbations

Silvestro Micera

Unbalancing events during gait can end up in falls and, thus, injury. Detecting events that could bring to fall and consequently activating fall prevention systems before the impact may help to mitigate related injuries. However, there is uncertainty about ...

IEEE2019

Hand exoskeleton device

José del Rocio Millán Ruiz, Luca Randazzo

The invention relates to a hand exoskeleton device having a modular nature. The device is designed to be wearable, portable and light in weight, and comprises from one to ten modules each having an actuating mechanism such as a linear actuator coupled with ...

2019

Tower and Path-Dependent Voltage Effects on the Measurement of Grounding Impedance for Lightning Studies

Marcos Rubinstein, Antonio Sunjerga, Hamidreza Karami, Keyhan Sheshyekani

We present an analysis aimed at evaluating the effect of the presence of the tower on the measurement of the grounding impedance. The Numerical Electromagnetics Code NEC-4 is used for the full-wave modeling of the structure including the tower and its foot ...