Publications associées à Analytical Studies in Support of an Improved Approach to the Design of Acceleration-Sensitive Nonstructural Elements

The new Chapter 9 of Eurocode 8 Part 3 for Seismic Assessment of Existing Steel Structures

The seismic assessment of existing steel structures necessitates the development of practice- oriented engineering models for use in nonlinear static and dynamic analysis procedures. These models should encompass the full range of the anticipated nonlinear ...

2023

Experimental Study to Validate an Improved Approach to Design Acceleration-Sensitive Nonstructural Components

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

Nonstructural components in buildings can be subjected to very large acceleration and deformation demands during earthquakes. This is particularly true for flexible components that are tuned or nearly tuned to one of the modal frequencies of the supporting ...

Applied Technology Council, Sponse2022

Estimating the non-dimensional energy of vortex rings by modelling their roll-up

Karen Ann J Mulleners, Guillaume de Guyon-Crozier

The non-dimensional energy of starting vortex rings typically converges to values around 0.33 when they are created by a piston-cylinder or a bluff body translating at a constant speed. To explore the limits of the universality of this value and to analyse ...

Cambridge University Press2022

A probabilistic deformation-based seismic hazard model for Iran

Alireza Khodaverdian

Probabilistic seismic hazard analysis, as the most prevalent approach to evaluate earthquake hazard, is commonly based on earthquake catalogs. Although previous studies show that the recurrence time of large-magnitude (M-w > 7.0) events in Iran is more tha ...

2022

Proof Of Concept Of A Graphene-Based Resonant Accelerometer

Luis Guillermo Villanueva Torrijo, Daniel Moreno Garcia

Acceleration measurements are fundamental in applications such as consumer electronics, navigation, automotive safety and Internet of things (IoT). In comparison with capacitive or piezoresistive MEMS accelerometers, resonant graphene accelerometers have t ...

IEEE2021

Seismic vulnerability assessment of free-standing massive masonry columns by the 3D Discrete Element Method

Jinwoo Kim

Free-standing masonry column is a recurrent typology of built cultural heritage. Usually raised without seismic design, columns are subject to intense rocking and overturning under strong ground motions. In this paper, a strategy to assess their seismic vu ...

ELSEVIER SCI LTD2021

Stabilization of the linearized water tank system

Shengquan Xiang

In this article we study the so-called water tank system. In this system, the behavior of water contained in a 1-D tank is modelled by Saint-Venant equations, with a scalar distributed control. It is well-known that the linearized systems around uniform st ...

2022

Study on Mechanical Performance of Prestressed UHPFRC U-Beam Bridges

Eugen Brühwiler

The forms of U-shaped UHPFRC beams have not been investigated for the highway footbridge. Compared with the traditional section forms, the U-shaped UHPFRC beams can reduce the material consumption under the condition of providing the same bearing capacity. ...

2021

Fragility Assessment of Beam-Slab Connections for Informing Earthquake-Induced Repairs in Composite-Steel Moment Resisting Frames

Dimitrios Lignos, Hammad El Jisr

Earthquake loss estimation in composite-steel moment resisting frames (MRFs) necessitates a proper estimation of the level of damage in steel beam-to-slab connections. These usually feature welded headed shear studs to ensure the composite action between t ...

2021

Heat source and voiding signatures of Mullins damage in filled EPDM

Nicolas Candau, Oguzhan Oguz

The thermomechanical coupling of Mullins damage in filled EPDM has been investigated by analysing the self-heating via Infrared thermography (IR) and the voiding fraction by Digital Image Correlation (DIC). The volumetric strain measured during the rubber ...

ELSEVIER SCI LTD2020