Effects of neutron irradiation on the microstructure and mechanical properties of the heat affected zone of stainless steel welds
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Oxide dispersion strengthened (ODS) steels are very promising materials for nuclear applications. In thispaper, the hot working behavior of ODS ferritic steels, consolidated by hot extrusion, is studied through torsion tests. Three ODS steels are produced ...
The ITER Central Solenoid (CS), positioned in the center of the ITER tokamak, will provide a magnetic field, contributing to the confinement of the plasma. The 13 m high CS consists of a vertical stack of 6 independently driven modules, dynamically activat ...
The constant flow stress reached during uniaxial deformation of electrodeposited nanocrystalline Ni reflects a quasi-stationary balance between dislocation slip and grain boundary (GB) accommodation mechanisms. Stress reduction tests allow to suppress disl ...
Irradiation is known to lead to degradation of mechanical properties of materials. Structural materials for nuclear applications can be affected by helium produced by transmutations. The objectives of this work were: (a) to investigate the effects of He on ...
Al-Zn-Mg(-Cu) (AA7xxx) alloys are widely used structural materials owing to their excellent mechanical properties and low corrosion susceptibility. The high strength of these materials is obtained by the formation of secondary phases, e.g. precipitation. T ...
We report on the diffraction peak shape evolution from cementite particles in three steel microstructures, recorded during in-situ tensile deformation at room temperature. We demonstrate that in a bainitic tempered steel the observed peak broadening and as ...
The microstructure of porous silver layers produced under different low temperature pressure-assisted sintering conditions is characterized and linked with the mechanical behavior studied insitu during X-ray diffraction. Peak profile analysis reveals impor ...
Plasticity size effects have been the focus of strong recent interest due to the miniaturization of devices such as actuators and different medical apparatuses. Devices with a sub-micrometre dimension have a high market potential and therefore a thorough u ...
This contribution draws practical implications of a recently published estimation of the tensile ductility in laminated composites made of two ductile materials, typically metals or alloys, which harden as both the strain and the strain-rate increase. To t ...
Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...
