Constitutive behavior and fracture properties of tempered martensitic steels for nuclear applications
Publications associées (691)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This thesis is focused on the properties of microcellular aluminium, produced by replication processing, at the micro, meso and macrostructural level. The replication process is based on the infiltration of a porous sodium chloride (NaCl) perform with molt ...
A novel electro-fragmentation method was developed as a fast alternative to the time consuming fragmentation test carried out in situ in a microscope, to investigate the failure of dielectric inorganic coatings on polymer substrates. An ultrathin conductiv ...
The first reported tensile semi-solid stress/strain data for as-cast magnesium alloy Mg Al3 Zn1 are provided. The results show that the maximum tensile stress at the solidus temperature (460 degrees C) was 13 MPa. Furthermore, this alloy has no ductility a ...
Flexures are mechanical elements used in micro- and precision-engineering to precisely guide the motion of micro-parts. They consist of slender bodies that deform elastically upon the application of a force. Although counter-intuitive at first, fused silic ...
The temperature dependence of residual stresses in a WC-17.8vol.%Co cemented carbide was measured by neutron diffraction. The comparison of the WC lattice parameter within the WC-Co and within stress-free WC reference provides a measurement of lattice elas ...
TiAl is a well known high temperature material with good creep properties. It is investigated as a potential structural material for Generation IV high temperature gas cooled nuclear reactors. The tests are performed with the ABB-2 (Ti-rich TiAl with 2 at. ...
The linking of atomistic simulations of stress-driven processes to experimentally observed mechanical behavior via the computation of activation energy barriers is a topic of intense current research. Using dislocation nucleation from a crack tip as the re ...
An advanced oxide dispersion strengthened (ODS) ferritic steel with very fine oxide particles has been homogeneously implanted with helium under uniaxial tensile stresses from 20 to 250 MPa to a maximum dose of about 0.38 dpa (1650 appm-He) with displaceme ...
The effects of the post-yield behaviour on the shape of small ball punch test (SBPT) curves were investigated with finite element simulations from which the load-deflection curves were extracted. We have shown the general yield load defined on the ball pun ...
Two types of oxide dispersion strengthened (ODS) ferritic steels, with the composition of Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) (in weight percent), have been produced by mechanically alloying elemental powders of Fe, Cr, W, and Ti with Y2O3 particles either in arg ...